Mechanism of rock breaking by pick assisted with water jet of different modes

被引：27
作者：
Liu, Xiaohui [2 ,3 ]
Liu, Songyong [1 ,2 ,3 ]
Ji, Huifu [2 ,3 ]
机构：
[1] China Univ Min & Technol, Sch Mechatron Engn, Xuzhou 221116, Peoples R China
[2] China Univ Min & Technol, Sch Mechatron Engn, Xuzhou 221116, Peoples R China
[3] China Univ Min & Technol, Jiangsu Key Lab Mine Mech & Elect Equipment, Xuzhou 221116, Peoples R China
来源：
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 2015年 / 29卷 / 12期
关键词：
Water jet; Tool failure; Rock breaking; Conical pick; Pre-split; STONE SURFACE-TREATMENT; NUMERICAL-SIMULATION; HARD-ROCK; PERFORMANCE; CUTTER;
D O I：
10.1007/s12206-015-1137-3
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In the rock breaking progress, the resistant force results in tools failure and the low cutting efficiency, thus, it is necessary to reduce the failure of tools and enhance the efficiency of cutting and drilling. In this paper, different configuration modes of water jet were presented to solve this issue. Moreover, the symmetrical pre-split finite element models for rock breaking by pick without water jet and picks assisted with different configuration modes of water jet were established to analyze the effect of different configuration modes on rock stress distribution and pick cutting forces. Finally, the experiments were conducted to validate the theory analysis. The results indicate that the cutting force decreasing rate of JCP is maximum all the time under the same conditions compared with the decreasing rate of JSP and JFP; and the numerical results were consistent with the numerical, which verifies the correctness of theory analysis.
引用
收藏
页码：5359 / 5368
页数：10
相关论文
共 35 条
[1]   Evaluation of saturation effects on drag pick cutting of a brittle sandstone from full scale linear cutting tests [J].
Abu Bakar, Muhammad Zubair ;
Gertsch, Leslie Sour .
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 2013, 34 :124-134
[2]  
Aydin G., 2014, ARAB J GEOSCI, V15, P278
[3]   Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results [J].
Bilgin, N ;
Demircin, MA ;
Copur, H ;
Balci, C ;
Tuncdemir, H ;
Akcin, N .
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2006, 43 (01) :139-156
[4]   Technical-economic assessment of stone slabs surface finishing using water jet technology [J].
Careddu, Nicola ;
Akkoyun, Ozgur ;
Medda, Pierpaolo ;
Tilocca, Caterina .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 71 (9-12) :1991-2001
[5]   Improvement of Disc Cutter Performance by Water Jet Assistance [J].
Ciccu, Raimondo ;
Grosso, Battista .
ROCK MECHANICS AND ROCK ENGINEERING, 2014, 47 (02) :733-744
[6]   Improvement of the Excavation Performance of PCD Drag Tools by Water Jet Assistance [J].
Ciccu, Raimondo ;
Grosso, Battista .
ROCK MECHANICS AND ROCK ENGINEERING, 2010, 43 (04) :465-474
[7]   An investigation on use of colemanite powder as abrasive in abrasive waterjet cutting (AWJC) [J].
Cosansu, Gulay ;
Cogun, Can .
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2012, 26 (08) :2371-2380
[8]   THEORY OF HYDRAULIC ROCK CUTTING [J].
CROW, SC .
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 1973, 10 (06) :567-584
[9]   The internal failure of rock samples subjected to pulsed water jet impacts [J].
Dehkhoda, Sevda ;
Hood, Michael .
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2014, 66 :91-96
[10]   An experimental study of surface and sub-surface damage in pulsed water-jet breakage of rocks [J].
Dehkhoda, Sevda ;
Hood, Michael .
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2013, 63 :138-147
1234