Calculation method on shape finding of self-anchored suspension bridge with spatial cables

被引：11

作者：

Han Y. ^{[1
,2
]}

Chen Z. ^{[2
]}

Luo S. ^{[3
]}

Yang S. ^{[4
]}

机构：

[1] School of Civil Engineering and Architecture, Changsha University of Science and Technology

[2] Wind Engineering Research Center, Hunan University

[3] China Railway Siyuan Survey and Design Group Co. Ltd.

[4] China Railway Eryuan Engineering Group Co. Ltd.

来源：

Frontiers of Architecture and Civil Engineering in China | 2009年 / 3卷 / 2期

基金：

中国国家自然科学基金;

关键词：

Bridge engineering; Calculation method; Self-anchored suspension bridges; Shape-finding; Special cables;

D O I：

10.1007/s11709-009-0021-6

中图分类号：

学科分类号：

摘要：

Based on the spatial model, a reliable and accurate calculation method on the shape finding of self-anchored suspension bridge with spatial cables was studied in this paper. On the principle that the shape of the main cables between hangers is catenary, the iteration method of calculating the shapes of the spatial main cables under the load of hanger forces was deduced. The reasonable position of the saddle was determined according to the shape and the theoretical joint point of the main cables. The shapes of the main cables at completed cable stage were calculated based on the unchanging principle of the zero-stress lengths of the main cables. By using a numerical method combining with the finite element method, one self-anchored suspension bridge with spatial cables was analyzed. The zero-stress length of the main cables, the position of the saddle, and the pre-offsetting of the saddle of the self-anchored suspension bridge were given. The reasonable shapes of the main cables at bridge completion stage and completed cable stage were presented. The results show that the shape-finding calculation method is effective and reliable. © 2009 Higher Education Press and Springer-Verlag GmbH.

引用

页码：165 / 172

页数：7

共 9 条

[1]

Luo X., Xiao R., Xiang H., Cable shape analysis of suspension bridge with spatial cables, Journal of Tongji University (Natural Science), 32, 10, pp. 1349-1354, (2004)

[2]

Tan D., Decision method on reasonable design state of selfanchored suspension bridge, China Journal of Highway and Transport, 8, 2, pp. 51-55, (2005)

[3]

Kim H.-K., Lee M.-J., Chang S.-P., Non-linear shape-finding analysis of a self-anchored suspension bridge, Engineering Structures, 24, 12, pp. 1547-1559, (2002)

[4]

Li H., Zheng K., Wen S., Li J., Calculation method and application of shape-finding of self-anchored suspension bridge with spatial cables, Proceedings of the 17th Bridges Engineering in China, pp. 1060-1065, (2006)

[5]

Kim H.K., Lee M.J., Chang S.P., Determination of hanger installation procedure for a self-anchored suspension bridge, Engineering Structures, 28, 7, pp. 959-976, (2006)

[6]

Gil H., Choi Y., Cable erection test at pylon saddle for spatial suspention bridge, Journal of Bridge Engineering, 6, 3, pp. 183-188, (2001)

[7]

Wang P., Wu X., Analysis of cable shape of suspension bridge at cable finished stage, Structural Engineers, 21, 6, pp. 22-27, (2005)

[8]

Li X., Qiang S., Geometric form analysis of suspension bridge free cable, Journal of Chongqing Jiaotong Institute, 18, 3, pp. 7-13, (1999)

[9]

Yang M.-G., Chen Z.-Q., An analysis of construction stages simulation for self-anchored suspension bridges, Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences, 33, 2, pp. 26-30, (2006)

← 1 →