Water Modeling of Self-Braking Submerged Entry Nozzle Used for Steel Continuous Casting Mold

被引：0
作者：
Yongfeng Chen
Lifeng Zhang
Shufeng Yang
Jingshe Li
机构：
[1] University of Science and Technology Beijing (USTB),School of Metallurgical and Ecological Engineering
[2] Missouri University of Science & Technology,Department of Materials Science and Engineering
来源：
JOM | 2012年 / 64卷
关键词：
Continuous Casting; Level Fluctuation; Molten Steel; Casting Speed; Submerged Entry Nozzle;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Slag entrainment in a continuous casting mold is one of the major causes of macro nonmetallic inclusions in continuous casting steel products. Stabilizing the level fluctuation is an important factor to improve steel quality. A new type of submerged entry nozzle (SEN) named self-braking SEN was designed. In the current study, water modeling experiments were performed to study the effect of self-braking SEN on level fluctuation in a continuous casting slab mold. The level position and the root mean square value of level fluctuation were analyzed through the online detection data. The results showed that the flow in the mold was more symmetrical and the tracer dispersion was more uniform. Moreover, the meniscus was also more uniform than the conventional nozzle with the self-braking SEN, especially at high casting speed.
引用
收藏
页码：1080 / 1086
页数：6
相关论文
共 56 条
[1]  
Zhang L(2008)undefined Metall. Mater. Trans. B 39 534-undefined
[2]  
Wang Y(2001)undefined Metall. Mater. Trans. B 32 1143-undefined
[3]  
Zuo X(1994)undefined ISIJ Int. 34 883-undefined
[4]  
Bai H(1998)undefined ISIJ Int. 38 827-undefined
[5]  
Thomas BG(2000)undefined Tetsu-to-Hagané 86 259-undefined
[6]  
Yokoya S(2000)undefined ISIJ Int. 40 578-undefined
[7]  
Asako Y(2000)undefined Seramikkusu 35 617-undefined
[8]  
Hara S(1994)undefined Taikabutsu 46 215-undefined
[9]  
Szekely J(2007)undefined Metall. Mater. Trans. B 38B 63-undefined
[10]  
Yokoya S(2004)undefined Numer. Heat Trans. Part A Appl. 46 221-undefined
123456