Grinding of microstructured functional surfaces: A novel strategy for dressing of microprofiles

被引：29

作者：

Denkena B. ^{[1
]}

de Leon L. ^{[1
]}

Wang B. ^{[1
]}

机构：

[1] Institute of Production Engineering and Machine Tools (IFW), Leibniz University Hannover, 30823 Garbsen

来源：

Production Engineering | 2009年 / 3卷 / 01期

关键词：

Production process; Riblets; Surface structuring;

D O I：

10.1007/s11740-008-0134-0

中图分类号：

学科分类号：

摘要：

For the grinding of microstructured functional surfaces called riblets, a novel dressing strategy using diamond profile rollers was introduced for the generation of microprofiles on vitrified grinding wheels. The purpose of the present study is to grind special designed riblets (microgrooves with a width of 40 μm and depth of 20 μm) on the surfaces of compressor blades with the purpose of drag reduction in turbulent flow. It is currently not possible to achieve the desired microprofiles on grinding wheels by profile dressing directly, due to the limited producible minimal profile tip geometry on the dressing roller. The new profile dressing strategy using a profile shift kinematic allows generating microscopic roof profiles with an ideal sharp profile tip. Compared with dressing using form rollers, the new dressing method using profile rollers offers a much higher dressing efficiency and process stability at dressing microprofiles. © German Academic Society for Production Engineering (WGP) 2008.

引用

页码：41 / 48

页数：7

共 15 条

[1]

Blasi B., Boerner V., Gombert A., Heinzel A., Kubler V., Wittwer V., Combined functional surface-relief structures for various applications, Int Colloquium Surf, 10, pp. 222-229, (2000)

[2]

Bruse M., Zur Strömungsmechanik wandreibungsvermindernder Riblet-Oberflächen, (1998)

[3]

Hage W., Zur Widerstandsverminderung von dreidimensionalen Riblet-Strukturen und anderen Oberflächen, (2005)

[4]

Klocke F., Feldhaus B., Mader S., Development of an incremental rolling process for the production of defined riblet surface structures, Production Engineering Research and Development (Online) *Band 1 Heft, 4, pp. 351-356, (2007)

[5]

Siegel F., Ostendorf A., Stute U., Laser-based surface modification - Micro structures on macro areas. Euspen, Sixth International Conference of the European Society for Precision Engineering and Nanotechnology, pp. 272-275, (2006)

[6]

Wenda A., Schleifen von Mikrostrukturen in sprödharten Werkstoffen, (2002)

[7]

Hesselbach J., Hoffmeister H.-W., Hlavac M., Micro-grinding - Efficient technique for microstructuring of hardened steels, Prod Eng, 12, 1, pp. 1-4, (2005)

[8]

Denkena B., Reichstein M., Wang B., Manufacturing of micro-functional structures by grinding, Ann Ger Acad Soc Prod Eng, 13, 1, pp. 31-34, (2006)

[9]

Seume R., Ostendorf A., Denkena B., Reithmeier E., Meyer R., Exploratory Experiments on Machined Riblets for 2-D Compressor Blades, (2007)

[10]

Hessel D., Punktcrushieren keramisch gebundener Diamantschleifscheiben, (2003)

← 1 2 →