Brittle Fracture of Rounded V-Notches in Isostatic Graphite under Static Multiaxial Loading

被引:0
作者
F. Berto
A. Campagnolo
M. R. Ayatollahi
机构
[1] University of Padova,Department of Management and Engineering
[2] Iran University of Science and Technology,Fatigue and Fracture Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering
来源
Physical Mesomechanics | 2015年 / 18卷
关键词
multiaxial loading; isostatic polycrystalline graphite; V-notch; strain energy density; control volume;
D O I
暂无
中图分类号
学科分类号
摘要
While a large bulk of experimental results from cracked specimens of polycrystalline graphite under pure modes of loading, in particular under mode I loading, can be found in the literature, only a very limited number of tests have been carried out on notches. At the best of the author knowledge dealing with the specific case of V-notches under mixed mode loading (tension + torsion) no results can be found in the literature. With the aim to fill this lack, the problem of mixed mode (I + III) brittle fracture of polycrystalline graphite is investigated systematically here for the first time. The present study considers cylindrical specimens weakened by circumferential notches characterized by different acuities. A new complete set of experimental data is provided considering different geometrical configurations by varying the notch opening angle and the notch tip radius. The multiaxial static tests have been performed considering different values of the mode mixity ratio (i.e. the ratio between the nominal stress due to tension and that due to torsion loading). A criterion based on the local strain energy density previously applied by the same authors only to pure modes of loading is extended here to the case of tension and torsion loadings applied in combination. The proposed criterion allows a sound assessment of the fracture loads.
引用
收藏
页码:283 / 297
页数:14
相关论文
共 161 条
  • [1] Sakai M.(1983)Energy Principle of Elastic-Plastic Fracture and Its Application to the Fracture Mechanics of a Polycrystalline Graphite J. Am. Ceram. Soc 66 868-874
  • [2] Urashima K.(1978)Combined Mode Fracture Toughness Measurement by the Disk Test J. Eng. Mater. Technol 100 175-182
  • [3] Inagaki M.(1999)Crack-Face Grain Interlocking/Bridging of a Polycrystalline Graphite: The Role in Mixed Mode Fracture Carbon 37 1633-1639
  • [4] Awaji H.(2000)Measurement of Fracture Toughness for Brittle Materials under Mixed-Mode Impact Loading Using Center-Notched Disk Specimen J. Soc. Mater. Sci. Japan 49 1324-1329
  • [5] Sato S.(2001)Measurement of Mixed-Mode Fracture Toughness for Brittle Materials Using Edge-Notched Half-Disk Specimen Zair. Soc. Mater. Sci. Japan 50 229-234
  • [6] Li M.(2008)Analysis of Crack Propagation in Nuclear Graphite Using Three-Point Bending of Sandwiched Specimens J. Nucl. Mater. 372 141-151
  • [7] Tsujimura M.(2011)In Situ Observation of Crack Nuclei in Poly-Granular Graphite under Ring-on-Ring Equi-Biaxial and Flexural Loading Eng. Fract. Mech 78 1756-1770
  • [8] Sakai M.(2008)An Innovative Technique for Evaluating Fracture Toughness of Graphite Materials J. Nucl. Mater. 381 177-184
  • [9] Yamauchi Y.(2004)Strength and Fracture Toughness of Interpenetrating Graphite/Aluminium Composites Produced by the Indirect Squeeze Casting Process Mater. Sci. Eng. A 386 61-67
  • [10] Nakano M.(2001)Pure Mode I, II and Mixed Mode Interlaminar Fracture of Graphite/Epoxy Composite Materials J. Reinf. Plast. Compos. 20 794-808