Improvement of Abrasive Finishing for Valves Repair

被引：0

作者：

Skryabin V.A. ^{[1
]}

Skhirtladze A.G. ^{[2
]}

机构：

[1] Penza State University, Penza

[2] Moscow State University of Technology “Stankin”, Moscow

来源：

Steel in Translation | 2023年 / 53卷 / 02期

关键词：

achievement of repair quality; basic schemes of abrasive finishing; equipment; improvement of abrasive finishing; lapping tool; treatment process; valves repair;

D O I：

10.3103/S0967091223020171

中图分类号：

学科分类号：

摘要：

Abstract: The issues of improvement of abrasive finishing for valves repair are considered, the technological process of processing is considered in detail, as well as the issues of surface quality of repaired parts, effective equipment operating mode and conditions with respect to the use of lapping tools. The main process schemes of abrasive finishing used in the production process are highlighted. © 2023, Allerton Press, Inc.

引用

页码：112 / 118

页数：6

共 9 条

[1]

Yashcheritsyn P.I., Zaitsev A.G., Barbot'Ko A.I., Tonkie Dovodochnye Protsessy Obrabotki Detalei Mashin I Priborov (Fine Dressing Processes for Treatment of Machine and Device Elements), (1976)

[2]

Orlov P.N., Tekhnologicheskoe Obespechenie Kachestva Detalei Metodami Dovodki (Technological Quality Assurance of Machine Elements by Dressing Methods), (1988)

[3]

Seinov S.V., Technologies and equipment for seating the seals of fittings, Remont, Vosstanovlenie. Modernizatsiya, 2, pp. 8-13, (2002)

[4]

Sarda S.P., Le Tirant P., Baron G., Influence des contraintes et de la pression de fluide sur le cou lement dans les rocked fissurees, Adv. Rock Mech., 2, pp. 667-673, (1974)

[5]

Jakob V., Claser H., Eine Methode der Näherungswerte für Metalldichtungen der ND-Technik anhand mechanischen Ersatzmodele-4, Int. Dichtungstag, Dresden, pp. 420-444, (2004)

[6]

Karasev N.Y., Skhirtladze A.G., Abrasive action of processing fluid on surfaces of machine elements, Privodnaya Tekh, 2, pp. 35-41, (2013)

[7]

Skryabin V.A., Skhirtladze A.G., Zinkin S.V., Mathematical models of technological parameters of abrasive dressing process, Tekhnol. Met., 12, pp. 39-42, (2013)

[8]

Skryabin V.A., Nesterov S.A., Zheltova Z.V., Optimization of the trajectory of abrasive dressing process at recovery of sealing surfaces of bodies of the pipeline fitting valves, Remont, Vosstanovlenie. Modernizatsiya, 12, pp. 3-10, (2015)

[9]

Skhirtladze A.G., Skryabin V.A., Timiryazev V.A., Recondition technology of precision parameters of base components of horizontal boring machines, Remont, Vosstanovlenie. Modernizatsiya, 11, pp. 4-9, (2017)

← 1 →