Investigation on Microstructure and Dry Sliding Wear Behavior of a Novel Fe-Cr-B-C-Al-Si-Mn Composite Coatings on 2Cr13 Steel by Laser Cladding

被引：0

作者：

Jian Gu

Dongqing Li

Shengchun Liu

Jiajun Si

Songlin Cai

Xuliang Liu

Peng Liu

Kaiming Wang

机构：

[1] China Electric Power Research Institute,Hunan Provincial Key Laboratory of Intelligent Manufacturing Technology for High

[2] Changsha University of Science and Technology,performance Mechanical Equipment, College of Automobile and Mechanical Engineering

[3] Tsinghua University,State Key Laboratory of Tribology, Department of Mechanical Engineering

来源：

Journal of Materials Engineering and Performance | 2022年 / 31卷

关键词：

Fe-based composite coatings; laser cladding; microstructure; TEM; wear resistance;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A novel Fe-Cr-B-C-Al-Si-Mn composite coating was designed and synthesized on 2Cr13 steel substrate using laser cladding technique in this study. The microstructure evolution, microhardness and wear resistance of the composite coating were investigated. The results showed that the microstructure of the coating was mainly composed of α-(Fe,Cr,Al) martensite, retained γ-Fe, and the eutectic comprised of CrFeB, M3(C,B)2, M2(B,C) and M23(C,B)6. The average microhardness of the coating (742.1 HV0.5) was 3.95 times compared with the 2Cr13 steel substrate, and the wear resistance was enhanced by 12.5 times compared with the 2Cr13 steel substrate. The wear mechanisms were dominated by abrasive wear and oxidative wear.

引用

页码：2381 / 2390

页数：9

共 50 条

[31] Effects of Laser Scanning Rate and Ti Content on Wear of Novel Fe-Cr-B-Al-Ti Coating Prepared via Laser Cladding
Gu, Jian
Ju, Jiang
Wang, Rui
Li, Jingjing
Yu, Hongyao
Wang, Kaiming
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2022, 31 (08) : 2609 - 2620
[32] Microstructure and properties of Fe-based composite coating by laser cladding Fe-Ti-V-Cr-C-CeO2 powder
Zhang, Hui
Zou, Yong
Zou, Zengda
Wu, Dongting
OPTICS AND LASER TECHNOLOGY, 2015, 65 : 119 - 125
[33] Microstructure and Corrosion Behavior of Fe-15Mn-5Si-14Cr-0.2C Amorphous Steel
Zhao Yanchun
Mao Xuejing
Li Wensheng
Sun Hao
Li Chunling
Zhao Pengbiao
Kou Shengzhong
Liaw, Peter K.
ACTA METALLURGICA SINICA, 2020, 56 (05) : 715 - 722
[34] Microstructures and performances of Cr13Ni5Si2 based composite coatings deposited by laser cladding and laser-induction hybrid cladding
Wang, Dengzhi
Hu, Qianwu
Zeng, Xiaoyan
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 588 : 502 - 508
[35] Laser cladding for wear and corrosion resistant multi-functional Cr3Si-Cr2Ni3Si metal silicides matrix composite coatings
Wang, HM
Duan, G
Zhang, LY
Xi, WJ
LASERS IN MATERIAL PROCESSING AND MANUFACTURING, 2002, 4915 : 162 - 166
[36] On the microstructure, hardness and wear behavior of Al-Fe-Cr quasicrystal reinforced Al matrix composite prepared by selective laser melting
Kang, Nan
Fu, Yingqing
Coddet, Pierre
Guelorget, Bruno
Liao, Hanlin
Coddet, Christian
MATERIALS & DESIGN, 2017, 132 : 105 - 111
[37] Investigation on the microstructure and properties of the laser cladded Mo2NiB2-Cr7C3 composite coatings
Ni X.-J.
Zhang B.-W.
Zhao Z.-X.
Wang S.-Z.
Gu H.-W.
Hu Z.-W.
Li W.-G.
Li, Wen-Ge (wgli@shmtu.edu.cn), 1600, Chongqing Wujiu Periodicals Press (50): : 60 - 69
[38] Microstructure and dry sliding wear properties of laser clad Mo2Ni3Si/NiSi metal silicide composite coatings
Lu, XD
Wang, HM
JOURNAL OF ALLOYS AND COMPOUNDS, 2003, 359 : 287 - 291
[39] Dry wear and corrosive wear behavior of laser-cladded Co 19.6 Cr 19.6 Fe 19.6 Ni 19.6 (B 13.72 Si 5.88 ) 19.6 Y 2 and Fe 43.6 Ni 17.4 Cr 9 Co 6 B 17.5 Si 1.5 Nb 5 coatings
Junshan, Zeng
Liang, Chen
Yuankuo, Lan
Yuhao, Cheng
Luqian, Xu
Haoli, Jiang
Zhibing, Ding
Jianfeng, Zhang
Bin, Liu
Wenmin, Guo
SURFACE & COATINGS TECHNOLOGY, 2024, 485
[40] Effect of Laser Power on Macromorphology, Microstructure and Performance of Ti6Al4V/NiCr-Cr3C2 Cladding Coatings
Zhang Z.
Yang Q.
Yu Z.
Zhang T.
Lu X.
Wang H.
Cailiao Daobao/Materials Reports, 2024, 38 (02):

← 1 2 3 4 5 →