Investigation on Microstructure and Dry Sliding Wear Behavior of a Novel Fe-Cr-B-C-Al-Si-Mn Composite Coatings on 2Cr13 Steel by Laser Cladding

被引：0

作者：

Jian Gu

Dongqing Li

Shengchun Liu

Jiajun Si

Songlin Cai

Xuliang Liu

Peng Liu

Kaiming Wang

机构：

[1] China Electric Power Research Institute,Hunan Provincial Key Laboratory of Intelligent Manufacturing Technology for High

[2] Changsha University of Science and Technology,performance Mechanical Equipment, College of Automobile and Mechanical Engineering

[3] Tsinghua University,State Key Laboratory of Tribology, Department of Mechanical Engineering

来源：

Journal of Materials Engineering and Performance | 2022年 / 31卷

关键词：

Fe-based composite coatings; laser cladding; microstructure; TEM; wear resistance;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A novel Fe-Cr-B-C-Al-Si-Mn composite coating was designed and synthesized on 2Cr13 steel substrate using laser cladding technique in this study. The microstructure evolution, microhardness and wear resistance of the composite coating were investigated. The results showed that the microstructure of the coating was mainly composed of α-(Fe,Cr,Al) martensite, retained γ-Fe, and the eutectic comprised of CrFeB, M3(C,B)2, M2(B,C) and M23(C,B)6. The average microhardness of the coating (742.1 HV0.5) was 3.95 times compared with the 2Cr13 steel substrate, and the wear resistance was enhanced by 12.5 times compared with the 2Cr13 steel substrate. The wear mechanisms were dominated by abrasive wear and oxidative wear.

引用

页码：2381 / 2390

页数：9

共 50 条

[21] Microstructure evolution of phase separated Fe-Cu-Cr-C composite coatings by laser induction hybrid cladding
Dai, Xiaoqin
Zhou, Shengfeng
Wang, Meifeng
Lei, Jianbo
Wang, Chunxia
Wang, Tao
SURFACE & COATINGS TECHNOLOGY, 2017, 324 : 518 - 525
[22] Microstructure and high-temperature wear resistance of laser clad Cr2Ni3Si/Cr3Si metal silicide composite coatings on austenitic stainless steel
Duan, G
Wang, HM
RARE METAL MATERIALS AND ENGINEERING, 2003, 32 (05) : 394 - 397
[23] Microstructure and wear behavior of laser cladding VC-Cr7C3 ceramic coating on steel substrate
Wu, Qianlin
Li, Wenge
Zhong, Ning
Gang, Wu
Wang Haishan
MATERIALS & DESIGN, 2013, 49 : 10 - 18
[24] Microstructure and Dry Sliding Wear Behavior of Fe-Based (Cr, Fe)7C3 Composite Coating Fabricated by PTA Welding Process
Y. L. Yuan
Z. G. Li
Journal of Materials Engineering and Performance, 2013, 22 : 3439 - 3449
[25] Microstructure and Room Temperature Wear Properties of a Ni-Cr-B-Si-C Coating Layer Manufactured by the Laser Cladding Process
Kang, Tae-Hoon
Kim, Kyu-Sik
Park, Soon-Hong
Lee, Kee-Ahn
KOREAN JOURNAL OF METALS AND MATERIALS, 2018, 56 (06): : 423 - 429
[26] Microstructure and Dry Sliding Wear Behavior of Fe-Based (Cr, Fe)7C3 Composite Coating Fabricated by PTA Welding Process
Yuan, Y. L.
Li, Z. G.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (11) : 3439 - 3449
[27] Effect of strengthening particles on the dry sliding wear behavior of Al2O3-M7C3/Fe metal matrix composite coatings produced by laser cladding
Tan, H.
Luo, Z.
Li, Y.
Yan, F.
Duan, R.
Huang, Y.
WEAR, 2015, 324 : 36 - 44
[28] Multicriterion Assessment of Wear Resistance of Fe-Mn-C-B Eutectic Coatings Alloyed with Si, Ni, and Cr
Pashechko, M.
Montusiewicz, J.
Dziedzic, K.
Jozwik, J.
POWDER METALLURGY AND METAL CERAMICS, 2017, 56 (5-6) : 316 - 322
[29] Effects of Cr3C2 addition on microstructure and corrosion properties of Cr3C2/15-5PH composite coatings on 12Cr13 by laser cladding
Mao, Kaiyi
Du, Yanbin
Cao, Huajun
Peng, Yunchuan
He, Guohua
Liang, Qiang
Tu, Jian
MATERIALS TODAY COMMUNICATIONS, 2024, 41
[30] Effects of Laser Scanning Rate and Ti Content on Wear of Novel Fe-Cr-B-Al-Ti Coating Prepared via Laser Cladding
Jian Gu
Jiang Ju
Rui Wang
Jingjing Li
Hongyao Yu
Kaiming Wang
Journal of Thermal Spray Technology, 2022, 31 : 2609 - 2620

← 1 2 3 4 5 →