Effect of maltodextrin with different dextrose equivalents on the physicochemical properties of spray-dried barberry juice (Berberis vulgaris L.)

被引:0
作者
Narjes Nadali
Abolfazl Pahlevanlo
Mahboobe Sarabi-Jamab
Ahmad Balandari
机构
[1] Research Institute of Food Science and Technology,Food Processing Research Department
[2] Research Institute of Food Science and Technology,Food Biotechnology Research Department
来源
Journal of Food Science and Technology | 2022年 / 59卷
关键词
Barberry powder; Spray drying; Maltodextrin dextrose-equivalent; Physicochemical properties;
D O I
暂无
中图分类号
学科分类号
摘要
Spray-drying technique is widely used in the production of powder from fruit juices. Carrier type and inlet temperature are two major factors that influence drying efficacy and powder quality. In this study, barberry juice (Berberis vulgaris L.) was powdered using 12% (w/v) maltodextrin with 4–7 and 16.5–19.5 dextrose equivalents (DEs) at two different inlet temperatures at 130 and 150 °C. Moisture content, bulk density, hygroscopicity, color, total anthocyanin content (TAC), microstructure, glass transition temperature and the X-ray diffraction of the prepared powders were investigated. The inlet temperatures and the utilization of maltodextrin with different DEs as the carrier agent, had different effects on the physicochemical properties of the prepared powders. By increasing the inlet temperature, the moisture content decreased while hygroscopicity increased. At inlet temperature of 130 °C, powders prepared with lower maltodextrin DEs had higher moisture content and bulk density, but lower hygroscopicity (p < 0.05). The SEM result demonstrated that, a decrease in color of the powder by increasing the inlet temperature. Darker particles with higher a* values and total anthocyanin contents (4.68 mg/g) were obtained when a larger amount of maltodextrin with lower DEs was utilized. At the lower inlet temperature, the powder particles had smoother surfaces. The glass transition temperature of the powders ranged from 47.1 to 54 °C based on different inlet temperature and DEs as well as moisture content. The amorphous surfaces of the dried particles were verified via X-ray diffraction profiling. Overall, applying different DEs in combination and lower inlet temperature led to the more appropriate physical and functional properties to the barberry powder. The TAC significantly depended upon the carrier agent, the inlet air temperature, and the interaction between the two variables.
引用
收藏
页码:2855 / 2866
页数:11
相关论文
共 131 条
  • [11] Tang J(2007)Spray drying and agglomeration of instant bayberry powder Dry Technol 26 116-121
  • [12] Nindo CI(2005)Spray drying of tomato pulp in dehumidified air: 1. The effect on product recovery J Food Eng 66 25-34
  • [13] Sablani SS(2008)Effect of maltodextrin addition during spray drying of tomato pulp in dehumidified air: II Powder Properties Dry Technol 26 726-737
  • [14] Powers JR(2010)A new technique for spray drying orange juice concentrate Innov Food Sci Emerg 11 342-351
  • [15] Fellman JK(2008)Pharmacological and therapeutic effects of Berberis vulgaris and its active constituent, berberine Phytother Res 22 999-1012
  • [16] Emam Djomeh Z(2016)Effect of vacuum spray drying on the physicochemical properties, water sorption and glass transition phenomenon of orange juice powder J Food Eng 1 131-140
  • [17] Seddighi-pashaki A(2016)Investigation of suitable spray drying conditions for sugarcane juice powder production with an energy consumption study Agric Nat Resour 50 139-145
  • [18] Askari GR(2018)Effects of maltodextrins with different dextrose-equivalent values Flavour Frag J 33 153-159
  • [19] Ersus S(2016)Microencapsulation optimization of natural anthocyanins with maltodextrin, gum Arabic and gelatin Int J Biol Macromol 85 379-385
  • [20] Yurdagel U(2012)Spray drying for the production of nutraceutical ingredients-a review Food Bioprocess Tech 5 3-14