Wear Characteristics of Polymer -Based Composites

被引：0
|
作者：
Y. Şahin
H. Mirzayev
机构：
[1] Gazi University,Department of Manufacturing Engineering
[2] Azerbaijan Technical University,Department of Machine Elements
来源：
Mechanics of Composite Materials | 2015年 / 51卷
关键词：
PTFE; bronze-filled composite; glass-filled composite; carbon-filled composite; load; dry wear;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The dry wear of polytetrafluoroethylene (PTFE)-based composites, including bronze-filled composites (B60), glass-filled composites (G15), and carbon-filled composites (C25), produced by the mold casting method were investigated under different sliding conditions. The Taguchi L27 method and the analysis of variance were used to identify the effect of process parameters on the wear of tested materials. Experimental results showed that the wear resistance of G15 polymer composites was better than those of C25 and B60 ones. The specific wear rate decreased with increasing sliding distance and load, but partly decreased with increasing tensile strength.
引用
收藏
页码：543 / 554
页数：11
相关论文
共 50 条
  • [41] Grey Based Taguchi Optimization Method for Abrasive Wear Appraisal of Fibre-Reinforced PTFE Composites
    Ibrahim, Musa Alhaji
    Yusuf, Auwalu Gidado
    Dambatta, Murtala Sule
    Kunya, Bashir Isyaku
    Tambaya, Magaji
    Alhassan, Yusuf
    INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2023, 15 (07): : 145 - 156
  • [42] Categorization system of nanofillers to polymer composites
    Krasnov, A. P.
    Aderikha, V. N.
    Afonicheva, O. V.
    Mit', V. A.
    Tikhonov, N. N.
    Vasil'kov, A. Yu.
    Said-Galiev, E. E.
    Naumkin, A. V.
    Nikolaev, A. Yu.
    JOURNAL OF FRICTION AND WEAR, 2010, 31 (01) : 68 - 80
  • [43] Contact Mechanics and Tribology of Polymer Composites
    Myshkin, Nikolai
    Kovalev, Alexander
    Spaltman, Dirk
    Woydt, Mathias
    JOURNAL OF APPLIED POLYMER SCIENCE, 2014, 131 (03)
  • [44] Effect of load on the friction and wear characteristics of Si3N4-hBN ceramic composites sliding against steels
    Chen, Wei
    Zhang, Da
    Ai, Xu
    CERAMICS INTERNATIONAL, 2017, 43 (05) : 4379 - 4389
  • [45] A study on friction and wear characteristics of nanometer Al2O3/PEEK composites under the dry sliding condition
    Qiao, Hong-Bin
    Guo, Qiang
    Tian, Ai-Guo
    Pan, Guo-Liang
    Xu, Le-Bo
    TRIBOLOGY INTERNATIONAL, 2007, 40 (01) : 105 - 110
  • [46] An investigation on the wear behaviour of dissimilar polymer gear engagements
    Li, W.
    Wood, A.
    Weidig, R.
    Mao, K.
    WEAR, 2011, 271 (9-10) : 2176 - 2183
  • [47] Friction and wear characteristics of jatropha oil-based biodiesel blended lubricant at different loads
    Singh, Yashvir
    Singla, Amneesh
    Kumar, Ajay
    Kumar, Deepak
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2016, 38 (18) : 2749 - 2755
  • [48] Characteristics and applications of PTFE composites
    Hironaka, S
    JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 2004, 49 (07) : 573 - 577
  • [49] Ultralow wear PTFE composites filled with beryllia and germania particles
    Sun, Wei
    Liu, Xiaojun
    Liu, Kun
    Wang, Wei
    Ye, Jiaxin
    WEAR, 2020, 450
  • [50] Reciprocating friction and wear of polyimide composites filled with solid lubricants
    Song, Jingfu
    Zhao, Gai
    Ding, Qingjun
    Qiu, Jinhao
    JOURNAL OF POLYMER ENGINEERING, 2018, 38 (04) : 363 - 370
12345