Effect of vapor thermolysis on microstructure development of sol–gel-derived lead zirconate–titanate (PZT) and PZT-Sr(K0.25Nb0.75)O3 solid solutions

被引：0
作者：
Reinhard Krüger
Kerstin Schmale
机构：
[1] Universitätsklinikum Würzburg,Department of Functional Materials in Medicine and Dentistry
[2] Westfälische Wilhelms-Universität Münster,undefined
[3] Institute for Inorganic and Analytic Chemistry,undefined
[4] Fraunhofer Institute for Silicate Research,undefined
来源：
Journal of Sol-Gel Science and Technology | 2010年 / 55卷
关键词：
Vapor; Thermolysis; Lead zirconate titanate; SKN-PZT fiber; Perovskite; Pyrochlore; Crystallization; Sintering; Microstructure;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Ceramic granules of PZT (Pb(Zr53,Ti47)O3) and fibers of SKN-doped PZT (1 Mol-% Sr(K0.25Nb0.75)O3 substitution in PZT) were fabricated from sol–gel precursors. The transformation of the metal–organic gel to the oxide and its crystallization behavior was investigated by thermogravitmetry, and XRD. The formation of pyrochlore or perovskite phase was sensitive to the preceeding heat treatment conditions in moist atmosphere (termed vapor thermolysis). Lower thermolysis temperatures resulted in the preferred formation of metastable pyrochlore phase. Higher thermolysis temperatures favored the formation of perovskite. Investigation of sintered materials revealed a superior sintering activity for samples with pronounced intermediate pyrochlore content whereas low-pyrochlore samples remained highly porous after sintering. For constant chemical precursors the vapour thermolysis conditions (220–280 °C) siginificantly affected crystallization and sintering behavior of the PZT and SKN-PZT material.
引用
收藏
页码：66 / 72
页数：6
相关论文
共 126 条
[1]  
Glaubitt W(1994)A new way to spinnable sols derived from modified aluminum alkoxides J Sol-Gel Sci Technol 2 525-528
[2]  
Sporn D(1997)Sol-GEL processing of functional and structural ceramic oxide fibers J Sol-Gel Sci Technol 8 29-33
[3]  
Jahn R(2009)Bipolar strain hysteresis of poled composites with Nd–Mn-doped PZT fibres J Eur Cer Soc 29 1713-1720
[4]  
Glaubitt W(1999)Sol-Gel processing of transparent PLZT((Pb, La)(Zr, Ti)O J Sol-Gel Sci Tech 16 183-193
[5]  
Watzka W(1992)) fibers J Am Ceram Soc 75 2785-2789
[6]  
Scholz H(1998)Synthesis of highly oriented lead zirconate-lead titanate film using metallo-organics J Eur Ceram Soc 18 1759-1764
[7]  
Sporn D(1999)The manufacture of Yttrium Aluminium Garnet (YAG) fibers by blow spinning from a sol-gel precursor J Eur Ceram Soc 19 1747-1758
[8]  
Pientschke C(2007)The sintering behaviour, mechanical properties, and creep resistance of alingned polycrystalline Yttrium Aluminium Garnet (YAG) fibers, produced from aqueous sol-gel precursor J Mater Sci 42 7316-7323
[9]  
Kuvatov A(2000)Microstructure and ferroelectric properties of soft-doped sol-gel derived PZT/SKN fibers J Am Ceram Soc 83 873-881
[10]  
Steinhausen R(1996)Metastability of the fluorite, pyrochlore, and perovskite structures in the PbO-ZrO J Mater Res 11 2076-2084
12345678910