Fast Electromagnetic Tomography Image Reconstruction Algorithm Based on Dimension Reduction Technique

被引:0
作者
Jiwei Huo
Ze Liu
Yadong Wang
Wei Yuan
Chengfei Wang
机构
[1] Beijing Jiaotong University,School of Electronic Information Engineering
来源
Sensing and Imaging | 2020年 / 21卷
关键词
EMT; Image reconstruction; Demension reduction; High-speed;
D O I
暂无
中图分类号
学科分类号
摘要
Electromagnetic tomography systems that used in many industrial fields require high speed of image reconstruction. In this paper, a fast image reconstruction algorithm of electromagnetic tomography is proposed. For this method, firstly, the dimension of the sensitivity matrix is decreased through retention of principal component. Then, the distribution image is reconstructed by using traditional or improved reconstruction algorithm. This method can eliminate the redundant information of sensitivity matrix with little loss of feature information of sensitivity matrix. The simulation and experiment results show that compare with traditional image reconstruction algorithm (including iterative algorithm and single step algorithm), the proposed algorithm has significant advantage of imaging speed. The quality of reconstructed image that using traditional algorithm and reconstructed image that using proposed algorithm are almost same.
引用
收藏
相关论文
共 65 条
[1]  
Ma X(2005)Electromagnetic techniques for imaging the cross-section distribution of molten steel flow in the continuous casting nozzle IEEE Sensors Journal 5 224-232
[2]  
Peyton AJ(1996)An overview of electromagnetic inductance tomography: Description of three different systems Measurement Science & Technology 7 261-271
[3]  
Binns R(1998)Electromagnetic inductance tomography (EMT): Sensor, electronics and image reconstruction algorithm for a system with a rotatable parallel excitation field IEE Proceedings—Science, Measurement and Technology 145 20-25
[4]  
Higson SR(2019)A dual-modality integrated sensor for electrical capacitance tomography and electromagnetic tomography IEEE Sensors Journal 19 10016-10026
[5]  
Peyton AJ(2006)A planer EMT system for the detection of faults on thin metallic plates Measurement Science & Technology 17 2130-2135
[6]  
Yu ZZ(2006)Hardware and software design for an electromagnetic induction tomography (EMT) system for high contrast metal process applications Measurement Science & Technology 17 111-118
[7]  
Lyon G(2001)Magnetic induction tomography Measurement Science & Technology 12 1126-1131
[8]  
Yu ZZ(2011)Electromagnetic inspection of a two-phase flow of GaInSn and argon Flow Measurement & Instrumentation 22 10-16
[9]  
Peyton AJ(2015)Electromagnetic tomography rail defect inspection IEEE Transactions on Magnetics 51 1-7
[10]  
Xu LA(2010)Improving the temporal resolution of magnetic induction tomography for molten metal flow visualization IEEE Transactions on Instrumentation and Measurement 59 553-557