The Effect of Graphene Oxide Inclusion on the Mechanical, Thermal Properties of Polyamide 6

被引：0
|
作者：
Maziyar Sabet
Seyednooroldin Hosseini
机构：
[1] Universiti Teknologi Brunei,Petroleum and Chemical Engineering
[2] Islamic Azad University,EOR Research Center, Department of Petroleum Engineering, Omidiyeh Branch
来源：
Fibers and Polymers | 2021年 / 22卷
关键词：
Graphene oxide; Polyamide 6; Melt-blended; Composites; Characterizations;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The key point of this research was to assess the properties of polyamide 6 (PA6) composites with different graphene oxide (GO) loadings. PA6 with different GO loadings (0, 0.1, 1.0, 2.0, 5.0 wt%) were melt blended by twin-screw extrusion. In this study, the relationship between the mechanical, thermal, melt-flow, thermal conductivity, O2 penetration properties, and heat release rates of the PA6 with different GO inclusions is addressed, providing an economically feasible technique to alleviate the mechanical characteristics and efficacy of the process. The outcomes of this research deliver promising practical applications in various technological areas.
引用
收藏
页码：3082 / 3094
页数：12
相关论文
共 50 条
  • [1] The Effect of Graphene Oxide Inclusion on the Mechanical, Thermal Properties of Polyamide 6
    Sabet, Maziyar
    Hosseini, Seyednooroldin
    FIBERS AND POLYMERS, 2021, 22 (11) : 3082 - 3094
  • [2] Boosting polyamide 6: a comparative study on graphene and graphene oxide for improved mechanical and thermal properties
    Sabet, Maziyar
    POLYMER-PLASTICS TECHNOLOGY AND MATERIALS, 2025, 64 (01): : 20 - 32
  • [3] Enhancement of mechanical, thermal and tribological properties of AAPS-modified graphene oxide/polyamide 6 nanocomposites
    Chen, Yue
    Li, Duxin
    Yang, Wenyan
    Xiao, Chunguang
    COMPOSITES PART B-ENGINEERING, 2018, 138 : 55 - 65
  • [4] Effect of POSS on morphology, thermal and mechanical properties of polyamide 6
    Jeziorska, Regina
    Swierz-Motysia, Barbara
    Szadkowska, Agnieszka
    Marciniec, Bogdan
    Maciejewski, Hieronim
    Dutkiewicz, Michal
    Leszczynska, Irena
    POLIMERY, 2011, 56 (11-12) : 809 - 816
  • [5] Effect of graphene oxide on the mechanical and thermal properties of graphene oxide/hytrel nanocomposites
    Pandey, Neema
    Tewari, Chetna
    Dhali, Sunil
    Bohra, Bhashkar S.
    Rana, Sravendra
    Mehta, S. P. S.
    Singhal, Shailey
    Chaurasia, Alok
    Sahoo, Nanda Gopal
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2021, 34 (01) : 55 - 67
  • [6] Polyamide 6/Graphene composites: The effect of in situ polymerisation on the structure and properties of graphene oxide and reduced graphene oxide
    O'Neill, Aidan
    Bakirtzis, Dimitri
    Dixon, Dorian
    EUROPEAN POLYMER JOURNAL, 2014, 59 : 353 - 362
  • [7] Phase morphology and enhanced thermal/mechanical properties of polyamide 46/graphene oxide nanocomposites
    Chiu, Fang-Chyou
    Huang, I-Neng
    POLYMER TESTING, 2012, 31 (07) : 953 - 962
  • [8] Mechanical and thermal properties of polyamide-6 nanocomposites reinforced by graphene oxide with low loading by double extrusion method
    Tripathy, Sangita
    Singh, Bhanu Pratap
    de Oliveira, Sanair Massafra
    Kuznetsov, Alexei
    de Araujo, Joyce Rodrigues
    Gnaniah, Sam
    Dhakate, S. R.
    POLYMERS FOR ADVANCED TECHNOLOGIES, 2023, 34 (08) : 2788 - 2798
  • [9] Rheological properties of graphene oxide/polyamide 6 composites
    Liao, Haoran
    Yu, Tao
    Li, Yan
    POLYMER COMPOSITES, 2023, 44 (12) : 8683 - 8692
  • [10] The impact of reduced graphene oxide on the properties of polyamide 6
    Sabet, Maziyar
    Hosseini, Seyednooroldin
    POLIMERY, 2021, 66 (04) : 224 - 233
12345