An adaptive flexible polishing path programming method of the blisk blade using elastic grinding tools

被引:0
作者
Wenbo Huai
Yaoyao Shi
Hong Tang
Xiaojun Lin
机构
[1] Xi’an University of Technology,School of High Vocational Education
[2] Northwestern Polytechnical University,School of Mechanical Engineering
来源
Journal of Mechanical Science and Technology | 2019年 / 33卷
关键词
Blisk; Flexible polishing; Path programming; Elastic grinding tool;
D O I
暂无
中图分类号
学科分类号
摘要
As for blisk blade profile polishing, the “five-axis numerical control + flexible grinding head + elastic grinding tool” polishing process equipment has advantages of high precision, little interference, good adaptivity, etc.; in order that the elastic grinding tool (abrasive cloth wheel) can effectively fit in with the blade profile in the polishing process and polishing quality and efficiency can be improved, a polishing path programming method of the elastic grinding tool was studied, feed mode of the elastic grinding tool and parametric method of the blade profile were proposed, and calculation methods of offset surface, polishing spacing, polishing step size and cutter-axis vector were given; this polishing path programming method makes it possible for the flexible spindle mechanism keeps a reasonable pose during the polishing process so that the elastic grinding tool can not only effectively fit in with the blade profile but also the polishing force direction of the elastic grinding tool is basically identical with normal vector direction of the polishing point; the polishing test results indicate that: After polishing, blade surface roughness is smaller than 0.4 μm and blade profile tolerance is within the tolerance zone, thus satisfying technical requirements and indicating that the technology proposed in this paper can satisfy blisk blade profile polishing requirements.
引用
收藏
页码:3487 / 3495
页数:8
相关论文
共 107 条
[11]  
Gautier A(2005)Process modeling for robotic polishing Journal of Materials Processing Technology 159 69-82
[12]  
Hagege B(2015)Control of the contact force in a pre-polishing operation of free-form surfaces realised with a 5-axis CNC machine CIRP Annals-Manufacturing Technology 64 309-312
[13]  
Bounichane B(2015)On energetic assessment of cutting mechanisms in robot-assisted belt grinding of titanium alloys Tribology International 90 55-59
[14]  
Ho W H(2015)Constant-load adaptive belt polishing of the weak-rigidity blisk blade International Journal of Advanced Manufacturing Technology 78 1473-1484
[15]  
Tsai J T(2014)Research on control optimization for bonnet polishing system International Journal of Precision Engineering and Manufacturing 15 483-488
[16]  
Lin B T(2014)Experimental investigation and analytical modelling of the effects of process parameters on material removal rate for bonnet polishing of cobalt chrome alloy Precision Engineering 38 348-355
[17]  
Chou J(2015)Magnetorheological polishing using a permanent magnetic yoke with straight air gap for ultra-smooth surface planarization Precision Engineering 40 309-317
[18]  
Zhao P B(2013)Study on the effect of various machining speeds on the wafer polishing process Journal of Mechanical Science and Technology 27 3155-3160
[19]  
Shi Y Y(2008)Recent advances in polishing of advanced materials Materials and Manufacturing Processes 23 449-456
[20]  
Xiao G J(2012)Polishing of the aluminum sheets with magnetic abrasive finishing method International Journal of Advanced Manufacturing Technology 61 989-998