Influence of size and functionality of polymeric nanoparticles on the adsorption behavior of sodium dodecyl sulfate as detected by isothermal titration calorimetry

Isothermal titration calorimetry was used to monitor the adsorption of the surfactant sodium dodecylsulfate (SDS) on different sized pure and carboxy functionalized polystyrene nanoparticles prepared by the mini-emulsion process. The ITC experiment gives, additionally to the CMC values, information about the interaction of the surfactant molecules to the particle’s surface due to the particle surface properties. The adsorption heat depends on the chemical composition of the polymer as well on the particle size. It also provides information about the surface coverage with surfactant and the number of additional adsorbed molecules per particle until full coverage by surfactant is obtained. The surfactant adsorption increases from 0.3 molecules per nm2 for 50 nm to 8.5 molecules per nm2 for carboxy functionalized particles with diameters larger than 160 nm. The area ASurf-dens after the adsorption process gives information about the packing density of surfactant molecules on the particles in dependence of carboxy groups: an increasing number of carboxylic groups decreases the area occupied per SDS molecule. The adsorption process was also monitored by zeta potential measurements, where an increasing potential during the adsorption was detected.