Finite element simulation of microindentation

被引：13

作者：

Zhuk D.I. ^{[1
]}

Isaenkova M.G. ^{[1
]}

Perlovich Y.A. ^{[1
]}

Krymskaya O.A. ^{[1
]}

机构：

[1] National Research Nuclear University MEPhI, Kashirskoe sh. 31, Moscow

来源：

Zhuk, D.I. (dimazhuk@gmail.com) | 1600年 / Izdatel'stvo Nauka卷 / 2017期

关键词：

Berkovich indenter; deformation intensity; FE model; finite element method; indentation curves; instrumented indentation; microindentation; Oliver–Pharr technique;

D O I：

10.1134/S0036029517050123

中图分类号：

学科分类号：

摘要：

Finite element models are created to describe the testing of a material by a Berkovich indenter. The results of calculations by these models are compared to experimental data on indentation of the same material (grade 10 steel). The experimental and calculated data agree well with each other. The developed models for an indenter and the material to be tested are used to find the laws of behavior of a material during indentation. The state of stress in the material under an indenter is studied by various methods. The indentation results are plotted versus the mechanical properties of a material. © 2017, Pleiades Publishing, Ltd.

引用

页码：390 / 396

页数：6

共 11 条

[1]

Golovin Y.I., Nanoindentation and Its Possibilities, (2009)

[2]

Giannakopoulos A.E., Suresh S., Scripta Materialia, 40, (1999)

[3]

Oliver W.C., Pharr G.M., An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res., 2, 6, pp. 1564-1583, (1992)

[4]

International Standard Metallic Materials— Instrumented Indentation Test for Hardness: ISO/DIS 14577-1, 2 and 3

[5]

Hertz H.R., Vol., 1, (1882)

[6]

Tabor D., Proc. R. Soc. A, 192, (1948)

[7]

Boussinesq J., Application des Potentiels a l’étude de l’équilibre et du Mouvement des Solides Elastiques, (1985)

[8]

Sneddon I.N., The relation between load and penetration in the axisymetric Boussinesq problem for a punch of arbitrary profile, Intern. J. Eng. Sci., 3, pp. 47-57, (1965)

[9]

Venkatesh T.A., Van Vliet K.J., Determination of elasto-plastic properties by instrumented sharp indentation, Scripta Materialia, 42, pp. 833-839, (2000)

[10]

Chollacoop N., Dao M., Suresh S., Depth-sensing instrumented indentation with dual sharp indenters, Acta Materialia, 51, pp. 3713-3729, (2003)

← 1 2 →