Effect of curing regime on bonding strength of EVA modified mortar to tile

被引：0

作者：

Daihua He

机构：

[1] University of Shanghai for Science Technology,School of Materials Science & Engineering

[2] Tongji University,Key Laboratory of Advanced Civil Engineering Materials, Ministry of Education

来源：

Journal of Wuhan University of Technology-Mater. Sci. Ed. | 2010年 / 25卷

关键词：

EVA; redispersible powder; latex; bonding strength; curing regime;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Ethylene-Vinyl Acetate (EVA) redispersible powder and latex were used to modify mortar. Three kinds of curing regimes: standard curing, high temperature curing and freeze-thaw circle curing were adopted to cure the bonded samples. Bonding strength of EVA modified mortar was tested at 28 days. The development of bonding strengths under all three curing regimes were discussed and compared. The experimental results show that bonding strength increases with the increase of EVA content in mortar. The curing regime used within 28 days is critical according to the bonding strengths values under three curing regimes for different ages. The reasons of that the EVA can improve the bonding strength were analyzed.

引用

页码：346 / 348

页数：2

共 50 条

[1] Effect of Curing Regime on Bonding Strength of EVA Modified Mortar to Tile
何代华
Journal of Wuhan University of Technology(Materials Science), 2010, (02) : 346 - 348
[2] Effect of Curing Regime on Bonding Strength of EVA Modified Mortar to Tile
何代华
Journal of Wuhan University of Technology(Materials Science Edition), 2010, 25 (02) : 346 - 348
[3] Effect of Curing Regime on Bonding Strength of EVA Modified Mortar to Tile
He Daihua
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2010, 25 (02): : 346 - 348
[4] Influence of Curing Condition on the Adhesive Strength of EVA Modified Mortar to Tile
何代华
Journal of Wuhan University of Technology-Materials Science Edition, 2006, (S1) : 86 - 89
[5] Effect of cyclic curing conditions on the tensile bond strength between the polymer modified mortar and the tile
Li, Lei
Liu, Ke
Chen, Bo
Wang, Ru
CASE STUDIES IN CONSTRUCTION MATERIALS, 2022, 17
[6] Interface Bond Mechanism of EVA-Modified Mortar and Porcelain Tile
He, Daihua
Wang, Peiming
Liu, Ping
Liu, Xinkuan
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2013, 25 (06) : 726 - 730
[7] Study on the adhesive strength of EVA modified mortars to Tile
He, D. H.
Wang, P. M.
Zhu, H. B.
Proceedings of the 6th International Symposium on Cement & Concrete and CANMET/ACI International Symposium on Concrete Technology for Sustainable Development, Vols 1 and 2, 2006, : 1105 - 1107
[8] EFFECT OF POLYMER/CEMENT RATIO AND CURING REGIME ON POLYMER MODIFIED MORTAR PROPERTIES
Hatungimana, Daniel
Yazici, Semsi
Mardani-Aghabaglou, Ali
JOURNAL OF GREEN BUILDING, 2020, 15 (03): : 177 - 193
[9] Effect of Thermal Cycles and Curing Age on Bonding Strength of Cement Mortar Using Manufactured Sand
Cui, Hongzhi
Peng, Houquan
Yang, Weiwei
Yang, Haibin
Zhang, Chaohui
Zheng, Dapeng
BUILDINGS, 2024, 14 (03)
[10] Influences of 0-20°C curing systems on tensile bonding strength of polymer modified cement mortar
Wang, P. (tjwpm@126.com), 1600, Tongji University (17):

← 1 2 3 4 5 →