Effect of Silicon Content on the Wear Behavior of Low-Carbon Dual-Phase Steels

[1] Jiang Z(1992)A new relationship between the flow stress and microstructural parameters for dual phase steel Acta Metall Mater 40 1587-1597

[2] Liu J(1999)Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels Metall. Trans. 30A 1193-1202

[3] Lian J(1989)Yield behavior of dual-phase steel Scr. Metall. 23 865-870

[4] Bag A(2010)Influence of volume fraction of martensite on the work hardening behavior of two dual-phase steels with high and low silicon Int. J. Mater. Res. 101 1286-1292

[5] Ray KK(1991)Dry sliding wear in 2124 Al-Si Cw/17-4PH stainless steel systems Wear 147 355-374

[6] Dwarakadasa ES(1987)Goring and sliding abrasion of austenitic manganese steels reinforced by hard phases Wear 119 313-327

[7] Grushko B(2004)Development of wear resistant medium carbon dual phase steels and their mechanical properties Mater. Sci. Technol. 20 645-652

[8] Weiss BZ(2003)Correlating microstructural features and mechanical properties with abrasion resistance of a high strength low alloy steel Wear 254 120-128

[9] Nouri A(2007)Effect of microstructure on the oxidative wear behavior of plain carbon steel Wear 262 1225-1231

[10] Saghafian H(2014)Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels Wear 317 225-232

[1] Jiang Z(1992)A new relationship between the flow stress and microstructural parameters for dual phase steel Acta Metall Mater 40 1587-1597

[2] Liu J(1999)Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels Metall. Trans. 30A 1193-1202

[3] Lian J(1989)Yield behavior of dual-phase steel Scr. Metall. 23 865-870

[4] Bag A(2010)Influence of volume fraction of martensite on the work hardening behavior of two dual-phase steels with high and low silicon Int. J. Mater. Res. 101 1286-1292

[5] Ray KK(1991)Dry sliding wear in 2124 Al-Si Cw/17-4PH stainless steel systems Wear 147 355-374

[6] Dwarakadasa ES(1987)Goring and sliding abrasion of austenitic manganese steels reinforced by hard phases Wear 119 313-327

[7] Grushko B(2004)Development of wear resistant medium carbon dual phase steels and their mechanical properties Mater. Sci. Technol. 20 645-652

[8] Weiss BZ(2003)Correlating microstructural features and mechanical properties with abrasion resistance of a high strength low alloy steel Wear 254 120-128

[9] Nouri A(2007)Effect of microstructure on the oxidative wear behavior of plain carbon steel Wear 262 1225-1231

[10] Saghafian H(2014)Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels Wear 317 225-232