Reactive power deployment and cost benefit analysis in DNO operated distribution electricity markets with D-STATCOM

被引:0
作者
Atma Ram Gupta
Ashwani Kumar
机构
[1] National Institute of Technology,Department of Electrical Engineering
来源
Frontiers in Energy | 2019年 / 13卷
关键词
unbalanced distribution system; D-STATCOM; voltage sensitivity index; load models; load growth; distribution network operator (DNO);
D O I
暂无
中图分类号
学科分类号
摘要
The aim of this paper is to analyze unbalanced radial distribution systems (UBRDS) with the distribution static compensator (D-STATCOM). The main objectives of this paper are D-STATCOM allocation in UBRDS with an objective of providing reactive power support to enhance voltage profile and reduce line losses of the distribution network, determination of optimal D-STATCOM rating subjected to minimization of total cost, and impact of D-STATCOM placement on improving power factor and savings in cost of energy loss. The analysis is conducted on a large industrial load model with light, medium and high loading scenarios. Further, the impact of load growth is also considered for better planning of the power distribution system. The results are obtained on standard 25-bus UBRDS to check the feasibility of the proposed methodology.
引用
收藏
页码:86 / 98
页数:12
相关论文
共 51 条
  • [1] Ng H N(2000)Classification of capacitor allocation techniques IEEE Transactions on Power Delivery 15 387-392
  • [2] Salama M M A(2001)Reactive power as an ancillary service IEEE Transactions on Power Systems 16 294-300
  • [3] Chikhani A Y(1996)OPF for reactive pricing studies on the NGC system IEEE Transactions on Power Systems 11 226-232
  • [4] Bhattacharya K(2000)An improved STATCOM model for power flow analysis Power Engineering Society Summer Meeting 2 1121-1126
  • [5] Zhong J(2013)Power quality improvement by using D-STATCOM International Journal of Emerging Trends in Electrical and Electronics 2 1-12
  • [6] Dandachi N H(2012)Design and control of a D-STATCOM for power quality improvement using cross correlation function approach International Journal of Engineering Science and Technology 4 74-86
  • [7] Rawlins M J(2008)Modeling of series and shunt distribution FACTS devices in distribution systems load flow Journal of Electrical Systems 4 1-22
  • [8] Alsac O(2012)Identification of weak buses using voltage stability indicator and its voltage profile improvement by using DSTATCOM in radial distribution systems IOSR Journal of Electrical and Electronics Engineering 2 17-23
  • [9] Prais M(2014)Optimal location and sizing of D-STATCOM in distribution systems by immune algorithm Electrical Power and Energy Systems 60 34-44
  • [10] Stott O(2014)Optimal location and sizing determination of distributed generation and D-STATCOM using particle swarm optimization algorithm Electrical Power and Energy Systems 62 562-570