Characterization of sp2- and sp3-bonded carbon in wood charcoal

被引:0
作者
Kengo Ishimaru
Toshimitsu Hata
Paul Bronsveld
Takashi Nishizawa
Yuji Imamura
机构
[1] Daiwa House Industry Co. Ltd.,Research Institute for Sustainable Humanosphere
[2] Kyoto University,Department of Applied Physics
[3] University of Groningen,Polymer Electrolyte Fuel Cell Cutting
[4] National Institute of Advanced Industrial Science and Technology,Edge Research Center
来源
Journal of Wood Science | 2007年 / 53卷
关键词
Charcoal; Carbonization; Microstructure; Raman spectroscopy;
D O I
暂无
中图分类号
学科分类号
摘要
Japanese cedar (Cryptomeria japonica) preheated at 700°C was subsequently heated to 1800°C and characterized by electron microscopy, X-ray diffraction, and micro-Raman spectroscopy. The degree of disorder of carbon crystallites and the amount of amorphous phase decreased considerably with an increase in heat treatment temperature to 1400°C, while carbon crystallites clearly developed above this temperature, showing that the microstructure of carbonized wood undergoes drastic changes around 1400°C. Besides showing the bands for sp2-bonded carbon, the Raman spectra showed a shoulder near 1100 cm−1 assigned to sp3-bonded carbon. With an increase of heat treatment temperature, the peak position of the Raman sp3 band shifted to a lower frequency from 1190 to 1120 cm−1, which is due to the transformation of sp3-bonded carbon from an amorphous phase to a nanocrystalline phase. These data showed that the microstructure of carbonized wood from 700° to 1800°C consisted of the combination of sp2- and sp3-bonded carbon, which is probably due to the disordered microstructure of carbonized wood. It is suggested that the sp3-bonded carbon is transformed from an amorphous structure to a nanocrystalline structure with the growth of polyaromatic stacks at temperatures above 1400°C.
引用
收藏
页码:442 / 448
页数:6
相关论文
共 123 条
[1]  
Kaneko K.(1992)Origin of superhigh surface area and microcrystalline graphitic structures of activated carbons Carbon 30 1075-1088
[2]  
Ishii C.(2002)Surface energy distribution of carbon black measured by static gas adsorption Carbon 40 207-210
[3]  
Ruike M.(2001)Diamond and pore structure observed in wood charcoal J Wood Sci 47 414-417
[4]  
Kuwabara H.(2005)Catalytic graphitization of wood-based carbons with alumina by pulse current heating Fullerene Nanotube Carbon Nanostr 13 435-445
[5]  
Schroder A.(1998)Biomorphic cellular silicon carbide ceramics from wood I: processing and microstructure J Eur Ceram Soc 18 1961-1973
[6]  
Kluppel M.(2004)SiC/C composites from wood charcoal by pulse current sintering with SiO J Eur Ceram Soc 24 3575-3580
[7]  
Schuster R.(2004) — electrical and thermal properties Key Eng Mater 264-268 2267-2270
[8]  
Heidberg J.(1998)Silicon carbide nanorods and ceramics from wood J Wood Sci 44 56-61
[9]  
Ishimaru K.(1997)Analysis of chemical structure of wood charcoal by X-ray photoelectron spectroscopy Carbon 35 267-273
[10]  
Vystavel T.(2003)Carbonized wood monoliths — characterization Carbon 41 15-27