Interline Power Flow Controller (IPFC) Deployment in Long Transmission Lines and its Effects on Distance Relay

被引：1
作者：
Thakre M.P. [1 ]
Ahmad A. [2 ]
机构：
[1] Electrical Engineering Department, K. K.Wagh Institute of Engineering, Education and Research, Maharashtra, Nashik
[2] Electrical Engineering Department, S. E. T. Sandip University, Maharashtra, Nashik
来源：
Journal of The Institution of Engineers (India): Series B | 2022年 / 103卷 / 02期
关键词：
Fault resistance; Interline power flow controller (IPFC); Numerical distance relay; PSCAD/EMTDC;
D O I：
10.1007/s40031-021-00637-y
中图分类号：
学科分类号：
摘要：
This article presents apparent impedance calculations of the existing transmission lines and their distance protection zone 1, zone 2, and zone 3 settings when the interline power flow controller is deployed on the existing transmission lines. An interline power flow controller (IPFC) can considerably affect the performance of a distance relay in an existing transmission line. Installation of IPFC into an existing transmission line near generating plants is challenging in terms of installation of the IPFC in an available place and changing existing protection setting requirements of a transmission line. Due to the deployment of the IPFC into the transmission line, there will be a change in transmission line apparent impedance that will affect the zone settings of the distance relay. These zone settings play a major role in the protection of transmission lines. The application of IPFC is to control power flows of multiple transmission lines with different loading conditions. Distance protection setting calculations are performed on 2X660MW Singhitarai power plant (Chhattisgarh, India) 400 kV outgoing lines with the existing MICOM P443 distance relay with and without deployment of the IPFC. Zone settings for the line to ground (L–G) fault and three-phase faults are analyzed and the results are presented. © 2021, The Institution of Engineers (India).
引用
收藏
页码：491 / 505
页数：14
相关论文
共 24 条
  • [1] Hingorani N.G., Gyugyi L., Understanding FACTS” Concepts and Technology of Flexible AC Transmission Systems, (1999)
  • [2] Dash P.K., Et al., Adaptive relay setting for flexible AC transmission systems (FACTS), IEEE Trans. Power Deliv., 15, 1, pp. 38-43, (2000)
  • [3] Dash P.K., Pradhan A.K., Panda G., Distance protection in the presence of unified power flow controller, Elsevier Electr. Power Syst. Res., 54, pp. 189-198, (2000)
  • [4] Dubey R., Samantaray S.R., Panigrahi BK (2014) Simultaneous impact of unified power flow controller and off-shore wind penetration on distance relay characteristics, IET Gener. Trans. Distrib., 8, 11, pp. 1869-1880, (2014)
  • [5] Alizadeh M., Khodabakhshi-Javinani N., Gharehpetian G.B., Askarian-Abyaneh H., Performance analysis of distance relay in presence of unified Interphase power controller and voltage-source converters-based Interphase power controller, IET Gen. Trans. Distrib., 9, 13, pp. 1642-1651, (2015)
  • [6] Brahma S.M., Girgis A.A., Development of adaptive protection schemes for distribution systems with high penetration of distribution generation, IEEE Trans. Power Deliv., 19, 1, pp. 56-63, (2004)
  • [7] Sidhu T.S., Varma R.K., Gangadharan P.K., Et al., Performance of distance relays on shunt—facts compensated transmission lines, IEEE Trans. Power Deliv., 20, 3, pp. 1837-1845, (2005)
  • [8] Thakre M., Kale V.S., Abande G., Impact of STATCOM on distance relay, IEEE International Conference on Circuit, Power and Computing Technologies, 20–21 March 2014, Nagercoil, pp. 809-813, (2014)
  • [9] Shateri, Modified Distance Protection due to Presence of STATCOM on a Transmission Line, in Power Tech 2009 IEEE Bucharest, pp. 1-6, (2009)
  • [10] Khederzadeh M., Ghorbani A., Salemnia A., Impact of SSSC on the digital distance relaying, In IEEE Power and Energy Society General Meeting July, (2009)
123