Mechanical properties and hand evaluation of hemp woven fabrics treated with liquid ammonia

被引:0
|
作者
Dong Sun Ji
Jung Jin Lee
机构
[1] Dankook University,Department of Fiber System Engineering
来源
Fibers and Polymers | 2016年 / 17卷
关键词
Hemp fabrics; Liquid ammonia; Mechanical properties; Hand evaluation; Kawabata evaluation system for fabric;
D O I
暂无
中图分类号
学科分类号
摘要
The effects of liquid ammonia (L/A) treatment on the mechanical properties and hand of 100 % hemp woven fabrics were investigated by the KES-FB (Kawabata Evaluation System for Fabric). Tensile energy and tensile resilience were increased by the L/A treatment. Bending and shearing values such as bending rigidity, bending moment, shear stiffness, shear hysteresis of the L/A treated fabrics were lower than those of the untreated ones. Compressional linearity and compressional energy were decreased while the compressional resilience was increased by the L/A treatment. From the hand evaluation, the primary hand values as well as total hand value of the hemp fabric were markedly increased by the L/A treatment, especially when yarn number was fine. Therefore, L/A treatment was found to be an effective method of improving the flexibility and softness of hemp woven fabrics.
引用
收藏
页码:143 / 150
页数:7
相关论文
共 50 条
  • [31] Mechanical properties of chemically treated woven banana/polyvinyl alcohol composites
    Gunge, Amaresh
    Kivade, Sangshetty Bheemanna
    Nagamadhu, Mahadevappa
    Rajole, Sangamesh
    EMERGING MATERIALS RESEARCH, 2019, 8 (04) : 638 - 643
  • [32] Mechanical properties of chemically-treated hemp fibre reinforced sandwich composites
    Kabir, M. M.
    Wang, H.
    Lau, K. T.
    Cardona, F.
    Aravinthan, T.
    COMPOSITES PART B-ENGINEERING, 2012, 43 (02) : 159 - 169
  • [33] MODELLING THE EFFECT OF WEAVE STRUCTURE AND FABRIC THREAD DENSITY ON MECHANICAL AND COMFORT PROPERTIES OF WOVEN FABRICS
    Maqsood, Muhammad
    Nawab, Yasir
    Shaker, Khubab
    Umair, Muhammad
    Ashraf, Munir
    Baitab, Danish Mahmood
    Hamdani, Syed Talha Ali
    Shahid, Salma
    AUTEX RESEARCH JOURNAL, 2016, 16 (03) : 160 - 164
  • [34] Effect of Weave Structure and Weft Density on the Physical and Mechanical Properties of Micro polyester Woven Fabrics
    Abou Nassif, Gadah Ali
    LIFE SCIENCE JOURNAL-ACTA ZHENGZHOU UNIVERSITY OVERSEAS EDITION, 2012, 9 (03): : 1326 - 1331
  • [35] COMPARISON OF MECHANICAL AND THERMAL COMFORT PROPERTIES OF TENCEL BLENDED WITH REGENERATED FIBERS AND COTTON WOVEN FABRICS
    Basit, Abdul
    Latif, Wasif
    Ashraf, Munir
    Rehman, Abdur
    Iqbal, Kashif
    Maqsood, Hafiz Shahzad
    Jabber, Abdul
    Baig, Sajjad Ahmad
    AUTEX RESEARCH JOURNAL, 2019, 19 (01) : 80 - 85
  • [36] Influence of Water-Induced Degradation of Polytetrafluoroethylene (PTFE)-Coated Woven Fabrics Mechanical Properties
    Ambroziak, Andrzej
    Klosowski, Pawel
    MATERIALS, 2022, 15 (01)
  • [37] Fabrication of bionanocomposites reinforced with hemp nanocellulose and evaluation of their mechanical, thermal and dynamic mechanical properties
    Rana, S. S.
    Gupta, M. K.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2021, 235 (11) : 2470 - 2481
  • [38] Effect of weave structures and thread densities on the cover factor and mechanical properties of cotton spandex woven fabrics
    Islam, Shariful
    Mozumder, Aloke Kumar
    JOURNAL OF THE TEXTILE INSTITUTE, 2024, 115 (03) : 479 - 489
  • [39] The Effect of Accelerated Weathering on the Mechanical Properties of Alkali Treated Hemp Fibre/Epoxy Composites
    Islam, M. S.
    Pickering, K. L.
    Foreman, N. J.
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2011, 25 (15) : 1947 - 1959
  • [40] Effect of Hot-Pressing Process on Mechanical Properties of UHMWPE Fiber Non-Woven Fabrics
    Huang, Jiaxiang
    Zhang, Xiaoping
    Gu, Tianyi
    Zhang, Fubao
    Niu, Yanfeng
    Liu, Susu
    MATERIALS, 2024, 17 (11)