Erosion-Corrosion of Low-Carbon Steel in the Absence and Presence of Slurry in Saline Water: Kinetic and Mathematical Views

被引：12

作者：

Mahmood A.K. ^{[1
]}

Khadom A.A. ^{[2
]}

机构：

[1] Department of Mechanical Engineering, College of Engineering, Diyala University, Baquba, 32001, Diyala Governorate

[2] Department of Chemical Engineering, College of Engineering, Diyala University, Baquba, 32001, Diyala Governorate

来源：

Journal of Failure Analysis and Prevention | 2016年 / 16卷 / 06期

关键词：

Corrosion; Erosion; Flow; Kinetics; Regression analysis; Steel;

D O I：

10.1007/s11668-016-0180-4

中图分类号：

学科分类号：

摘要：

The purpose of this work is to study the combined effect of corrosion-erosion of mild steel in 3.5% NaCl solution as a function of flow rate, angle, sand concentration, and exposure time. Weight loss technique is used to obtain the corrosion-erosion data. The present work is focused on determining the optimum mathematical equation and operating conditions in order to achieve good prediction properties. Three mathematical-kinetics equations were suggested. A computer-aided program was used for developing these models. Results show that the polynomial mathematical equation was able to accurately predict the measured data with high correlation coefficients. © 2016, ASM International.

引用

页码：1071 / 1081

页数：10

共 23 条

[1]

Baotong L., Erosion-corrosion in oil and gas production, Res. Rev. Mater. Sci. Chem., 2, 1, pp. 19-60, (2013)

[2]

Postlethwaite J., Dobbin M.H., Bergevin K., The role of oxygen mass transfer in the erosion-corrosion of slurry pipelines, Corrosion, 42, pp. 514-524, (1986)

[3]

Neville A., Hodgkiess T., Study of effect of liquid corrosivity in liquid-solid impingement on cast iron and austenitic stainless steel, Br. Corros. J., 32, 3, (1997)

[4]

Neville A., Hodgkiess T., Dallas J.T., A study of the erosion-corrosion behavior of engineering steels for marine pumping applications, Wear, 186, pp. 497-507, (1995)

[5]

Burstein G.T., Sasaki K., Effect of impact angle on the erosion-corrosion of 304L stainless steel, Wear, 186-187, pp. 80-94, (1995)

[6]

Watson S.W., Friedersdorf F.J., Madsen B.W., Cramer S.D., Methods of measuring wear-corrosion synergism, Wear, 181-183, pp. 476-484, (1995)

[7]

Malka R., Nesic S., Gulino D.A., Erosion corrosion and synergistic effects in disturbed liquid-particle flow, Corrosion (2006), paper, 6594, pp. 1-22

[8]

Musa A.Y., Khadom A.A., Kadhum A.A.H., Mohamad A.B., Takriff M.S., Kinetic behavior of mild steel corrosion inhibition by 4-amino-5-phenyl-4H-1, 2, 4-triazole-3-thiol, J. Taiwan Inst. Chem. Eng., 41, (2010)

[9]

Khadom A.A., Abdul-Hadi A.A., Kinetic and mathematical approaches to the corrosion of mild steel in nitric acid, React. Kinet. Mech. Catal., 112, pp. 15-26, (2014)

[10]

Eddy N.O., Odoemelam S.A., Mbaba A.J., Inhibition of the corrosion of mild steel in HCl by Sparfloxacin, Afr. J. Pure Appl. Chem., 2, 12, pp. 132-138, (2008)

← 1 2 3 →