Optimization of Structurally Modified Wool/Polyester Blended Yarns Using Desirability Function

被引：6

作者：

Bhatia D. ^{[1
,2
]}

Sinha S.K. ^{[2
]}

机构：

[1] Department of Textile Engineering, Jawaharlal Nehru Government Engineering College, Sunder Nagar, Himachal Pradesh

[2] Department of Textile Technology, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab

来源：

Journal of The Institution of Engineers (India): Series E | 2020年 / 101卷 / 02期

关键词：

Blend composition; Compressibility; Desirability; Packing fraction;

D O I：

10.1007/s40034-020-00164-3

中图分类号：

学科分类号：

摘要：

Fibers are structural unit of a staple yarn, and its properties influence the properties of yarn. Structural modification through selective removal of component opens further scope of application. Yarns were prepared according to the mixture design for different fibers using design expert software. The effect of composition and selective removal of PVA on yarn properties has been reported. The potential of different fibers optimization to achieve maximum desirability for different properties of yarn for treated and untreated yarns with the help of desirability function has also been reported. It has been observed that dissolution of PVA component led to an increase in compressibility and reduction in packing fraction. Results of optimization for treated and untreated yarns show that almost same overall desirability can be achieved by using lower percentage of wool fiber in the case of treated yarn. © 2020, The Institution of Engineers (India).

引用

页码：115 / 124

页数：9

共 19 条

[1]

Bansal P., Maity S., Sinha S.K., Effect of process parameter on tensile and recovery behaviour of ring-spun cotton/lycra denim yarn, J. Inst. Eng. Ser. E, 100, 1, pp. 37-45, (2019)

[2]

Sharma N., Kumar P., Bhatia D., Sinha S.K., Moisture management behaviour of knitted fabric from structurally modified ring and vortex spun yarn, J. Inst. Eng. Ser. E, 97, 2, pp. 123-129, (2016)

[3]

Bhatia D., Malhotra U., Impact on properties of woven fabric from structurally modified shoddy/wool blended worsted yarn, J. Fash. Technol. Text. Eng., 4, 1, pp. 123-129, (2016)

[4]

Sinha S.K., Kumar P., Ghosh S., Study on the packing density of structurally modified ring spun yarn, Fibers Polym., 17, 11, pp. 1898-1907, (2016)

[5]

Ishtiaque S.M., Das A., Singh R.P., Packing of micro-porous yarns: Part I. Optimization of yarn characteristics, J. Text. Inst., 99, 2, pp. 147-155, (2008)

[6]

Chandrasekaran V., Senthilkumar P., Karthik T., Optimization of spinning parameters influencing the characteristics of structurally modified viscose yarn, J. Text. Inst., 107, 1, pp. 50-63, (2016)

[7]

Moghassem A.R., Gharehaghaji A.A., Redistribution of fibers in the structure of hollow ring spun yarn, IJE Trans. B Appl., 22, 2, pp. 197-204, (2009)

[8]

Pal S., Gauri S.K., A desirability functions-based approach for simultaneous optimization of quantitative and ordinal response variables in industrial processes, Int. J. Eng. Sci. Technol., 10, 1, (2018)

[9]

Derringer G., Suich R., Simultaneous optimization of several response variables, J. Qual. Technol., 12, 4, pp. 214-219, (1980)

[10]

Vining G.G., Myers R.H., Combining taguchi and response surface philosophies: A dual response approach, J. Qual. Technol., 22, 1, pp. 38-45, (1990)

← 1 2 →