Increasing the Accuracy of Honing for Thin-Walled Cylinders

被引：0
作者：
Ogorodov V.A. [1 ]
Krioni N.K. [1 ]
机构：
[1] Ufa State Aviation Technical University, ul. Karla Marksa 12, Ufa, 450000, Bashkortostan
来源：
Russian Aeronautics | 2020年 / 63卷 / 04期
关键词：
accuracy; axial tensile force; elastic diaphragm; fixing method; honing; radial forces; thin-walled cylinder; uneven deformation;
D O I：
10.3103/S1068799820040236
中图分类号：
学科分类号：
摘要：
Abstract: Through the study of uneven deformation under the action of radial forces in DEFORM-3D finite element simulation environment, a method of fixing a thin-walled cylinder during honing with an elastic cuff and axial tensile force was investigated. The conditions for increasing the accuracy of honing the holes of thin-walled cylinders were determined. © 2020, Allerton Press, Inc.
引用
收藏
页码：739 / 745
页数：6
相关论文
共 9 条
  • [1] Ogorodov V.A., Technological Support for the Durability of Thin-Walled Cylinders During Honing, KGTU im. A.N. Tupoleva, 2, pp. 48-54, (2015)
  • [2] Kudoyarov R.G., Features of Diamond Honing in the Manufacture of Precise Holes for Parts of Aircraft, Izv. Vuz. Av. Tekhnika, 45, 2, pp. 49-51, (2002)
  • [3] Ogorodov V.A., Simulation of Honing, Russian Engineering Research, 31, 3, pp. 292-295, (2011)
  • [4] Ogorodov V.A., Hole Shaping in the Honing of Thin-Walled Cylinders, Russian Engineering Research, 37, 6, pp. 549-553, (2017)
  • [5] Ogorodov V.A., Deliberate Deformation of a Thin-Walled Cylinder on Clamping, Russian Engineering Research, 37, 12, pp. 1023-1027, (2017)
  • [6] Lysenko N.K., Shilova Y.A., Technological Support for Honing Holes of Low-Rigidity Cylinders, Izv. SAmNTs RAN, 4, pp. 1104-1105, (2011)
  • [7] Ogorodov V.A., Calculation of Radial Cutting Forces when Honing Thin-Walled Cylinders, Metalloobrabotka, 2104, pp. 28-33, (2018)
  • [8] Ogorodov V.A., Analysis of Methods for Fixing Thin-Walled Cylinders on Honing Operations, Metalloobrabotka, 2109, pp. 22-29, (2019)
  • [9] Ogorodov V.A., Investigation of the Influence of the Expanding Force of Honing Beams on the Accuracy of Processing Thin-Walled Cylinders, Proc. of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, pp. 49-52, (2020)
1