Durability of asphalt mixture in different corrosion solution

被引:0
作者
Shuanfa Chen
Bowen Guan
Rui Xiong
Yanping Sheng
Rui He
机构
[1] Chang’ an University,Key Laboratory for Special Area Highway Engineering of Ministry of Education
[2] Chang’an University,School of Materials Science and Engineering
来源
Journal of Wuhan University of Technology-Mater. Sci. Ed. | 2011年 / 26卷
关键词
asphalt mixture; corrosion damage; corrosion mechanism; corrosion evaluation;
D O I
暂无
中图分类号
学科分类号
摘要
The corrosion to asphalt mixture under different kinds of corrosion solution, such as pH=2 solution, pH=12 solution, pH = 12 solution and 10% Na2SO4 solution, was studied. The performance attenuation of asphalt mixture was analyzed under the normal environment and the freeze-thaw environment, and the analysis was given on the sensitivity of the test results to the evaluation index. The experimental results show that the performance of asphalt mixture is attenuated faster under the acidic solution, alkaline solution and sulfate solution. Corrosion factor Kc, freeze-thaw corrosion factor Kf, and freeze-thaw effect factor Kfc are proposed to evaluate asphalt mixture resistance to corrosion in different kinds of corrosion solution. The values of Kc and Kfc decrease with the increasing of corrosion time. The change rule of Kf show that the rate of corrosion is decreased by the action of freeze-thaw in acidic solution and in alkaline solution, but is increased by the action of freeze-thaw in sulfate solution. The microscopic analysis indicates that acid solution reacts with aggregate of asphalt mixture, alkaline solution reacts with asphalt cement of asphalt mixture, the surface tension of sulfate solution and crystallization of sulfate are the main reasons which weak the performance of asphalt mixture.
引用
收藏
页码:1200 / 1204
页数:4
相关论文
共 22 条
[1]  
Gorkem C.(2009)Predicting Stripping and Moisture Induced Damage of Asphalt Concrete Prepared with Polymer Modified Bitumen and Hydrated Lime [J] Construction and Building Materials 23 2 227-2 236
[2]  
Sengoz Burak.(2009)Laboratory Investigation of Moisture Damage in Rubberised Asphalt Mmixtures Containing Reclaimed Asphalt Pavement[J] International Journal of Pavement Engineering 10 319-328
[3]  
Xiao F.(2008)Typical Causes and Countermeasures of Moisture Damage for Asphalt Pavement [J] Journal of Tongji University (Natural Science) 6 749-753
[4]  
Amirkhanian N.(2004)Effect of Moisture Damage on Material Properties and Fatigue Resistance of Asphalt Mixtures[C] 83rd Annual Meeting of the Transportaion-Research-Board, Washington DC 1891 48-54
[5]  
Serji R.(2010)New Parameter to Evaluate Moisture Damage of Asphalt-aggregate Bond in Using Dynamic Shear Rheometer [J] Journal of Materials in Civil Engineering 22 267-276
[6]  
Yang X.(2003)Evaluation of Water Damage Using Hot Mix Asphalt Fracture Mechanics [C] Asphalt Paving Technology: Association of Asphalt Paving Technologists-Proceedings of the Technical Sessions 72 424-462
[7]  
Liang Yongman.(2007)Effects of Fibers on the Dynamic Properties of Asphalt Mixtures[J] Journal Wuhan University of Technology-Materials Science Edition 22 733-736
[8]  
Lai Y.-R.(2006)The Effect of Alkali on Crude Oil/Water Interfacial Properties and the Stability of Crude Oil Emulsions [J] Colloids and Surfaces 273 213-218
[9]  
Kim D. N.(undefined)undefined undefined undefined undefined-undefined
[10]  
Little R. L.(undefined)undefined undefined undefined undefined-undefined