Phase Evolution in Hypereutectic Al90Cu10−xNix (x = 0, 5) Alloys

被引:0
|
作者
Sumanta Samal
Gandham Phanikumar
机构
[1] Indian Institute of Technology Madras,Department of Metallurgical and Materials Engineering
来源
Transactions of the Indian Institute of Metals | 2015年 / 68卷
关键词
Aluminium alloys; Microstructure; Quasi-peritectic reaction; X-ray diffraction; Electron microscopy;
D O I
暂无
中图分类号
学科分类号
摘要
The present work is aimed at understanding the phase evolution of hypereutectic Al-rich Al–Cu–Ni in situ composites consisting of ultrafine eutectic with micron scale dendrites. The hypereutectic Al90Cu10−xNix (x = 0, 5) are synthesized by vacuum arc melting technique under high purity argon atmosphere. Detailed X-ray diffraction and electron microscopic (SEM and TEM coupled with EDS) studies have been carried out to identify the phases in these alloys. Thermodynamic calculations performed using CALPHAD approach using ThermoCalc® software predict the equilibrium solidification path. The Al90Cu5Ni5 alloy exhibits ternary quasi-peritectic reaction of L + Al3Ni → (Al)ss + Al3Ni2 at invariant point, which is supported by two univariant reactions i.e. L + Al3Ni → Al3Ni2 and L → (Al)ss + Al3Ni2 above and below the invariant point respectively.
引用
收藏
页码:1221 / 1226
页数:5
相关论文
共 50 条
  • [21] Influence of Ag replacement on supercooled liquid region and icosahedral phase precipitation of Zr65Al7.5Ni10Cu17.5-xAgx (x=0-17.5 at%) glassy alloys
    Li, M. M.
    Inoue, A.
    Han, Y.
    Kong, F. L.
    Zhu, S. L.
    Shalaan, E.
    Al-Marzouki, F.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 735 : 1712 - 1721
  • [22] DEVELOPMENT OF CAST HYPEREUTECTIC Al-Si-X ALLOYS WITH ULTRAFINE-Si PHASE PART 1: AS-CAST STRUCTURE DEVELOPMENT
    Guba, P.
    Sokolowski, J.
    Sobiesiak, A.
    Conle, A.
    Gesing, A.
    Kasprzak, M.
    INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (03) : 1535 - 1557
  • [23] Microstructure and mechanical properties of two novel scrap tolerant Al65Cu10Mg10Si10Zn5 and Al80Cu5Mg5Si5Zn5 high entropy aluminum alloys
    Sanchez, Jon Mikel
    Galarraga, Haize
    Del Molino, Eider
    Albizuri, Joseba
    Guraya, Teresa
    Hudson, Shaymus W.
    INTERMETALLICS, 2023, 162
  • [24] DRY SLIDING WEAR PROPERTIES OF Al-7Si-4Zn-(0-5)Cu ALLOYS
    Alemdag, Y.
    Beder, M.
    JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, 2015, 21 (01): : 154 - 165
  • [25] The evolution and dissolution mechanism of 0-Al2Cu phase and the analysis of precipitation of a novel AlCu phase during elevated aging
    Dong, Xiongbo
    Yang, Sha
    Li, Na
    Zhong, Hao
    Wang, XueYi
    Dong, Hao
    MATERIALS CHARACTERIZATION, 2024, 217
  • [26] A new Al5Cu6(Li,Mg)2 cubic phase in an Al-Cu-Li-Mg-X alloy
    Jiang, Bo
    Li, Shichen
    Cao, Fuhua
    Song, Renguo
    Yi, Xiaoou
    MATERIALS CHARACTERIZATION, 2022, 189
  • [27] Microstructure and Corrosion Properties of Mg-xSn-5Al-1Zn (x=0, 1, 5 and 9 mass%) Alloys
    Park, Kyung Chul
    Kim, Byeong Ho
    Kimura, Hisamichi
    Park, Yong Ho
    Park, Ik Min
    MATERIALS TRANSACTIONS, 2010, 51 (03) : 472 - 476
  • [28] A detailed study of phase evolution in Cu-16 at. % Al and Cu-30 at. % Al alloys under different types of mechanical alloying processes
    Giordana, M. F.
    Esquivel, M. R.
    Zelaya, E.
    ADVANCED POWDER TECHNOLOGY, 2015, 26 (02) : 470 - 477
  • [29] Impact of tungsten on phase evolution in nanocrystalline AlCuCrFeMnWx (x=0, 0.05, 0.1 and 0.5 mol) high entropy alloys
    Kumar, Devesh
    Maulik, Ornov
    Kumar, Saurav
    Sharma, V. K.
    Prasad, Y. V. S. S.
    Kumar, Vinod
    MATERIALS RESEARCH EXPRESS, 2017, 4 (11):
  • [30] Microstructural evolution of dual multi-phase intermetallic alloys composed of geometrically close packed Ni3X (X: Al and V) type structures
    Shibuya, S.
    Kaneno, Y.
    Tsuda, H.
    Takasugi, T.
    INTERMETALLICS, 2007, 15 (03) : 338 - 348