Phase Evolution in Hypereutectic Al90Cu10−xNix (x = 0, 5) Alloys

被引：0
|
作者：
Sumanta Samal
Gandham Phanikumar
机构：
[1] Indian Institute of Technology Madras,Department of Metallurgical and Materials Engineering
来源：
Transactions of the Indian Institute of Metals | 2015年 / 68卷
关键词：
Aluminium alloys; Microstructure; Quasi-peritectic reaction; X-ray diffraction; Electron microscopy;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The present work is aimed at understanding the phase evolution of hypereutectic Al-rich Al–Cu–Ni in situ composites consisting of ultrafine eutectic with micron scale dendrites. The hypereutectic Al90Cu10−xNix (x = 0, 5) are synthesized by vacuum arc melting technique under high purity argon atmosphere. Detailed X-ray diffraction and electron microscopic (SEM and TEM coupled with EDS) studies have been carried out to identify the phases in these alloys. Thermodynamic calculations performed using CALPHAD approach using ThermoCalc® software predict the equilibrium solidification path. The Al90Cu5Ni5 alloy exhibits ternary quasi-peritectic reaction of L + Al3Ni → (Al)ss + Al3Ni2 at invariant point, which is supported by two univariant reactions i.e. L + Al3Ni → Al3Ni2 and L → (Al)ss + Al3Ni2 above and below the invariant point respectively.
引用
收藏
页码：1221 / 1226
页数：5
相关论文
共 50 条
  • [11] Thermal stability of (Ce0.72Cu0.28)90-xAl10Fex (x=0, 5 or 10) bulk metallic glasses
    Qiao, J. C.
    Pelletier, J. M.
    PHYSICA STATUS SOLIDI C: CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 8, NO 11-12, 2011, 8 (11-12): : 3074 - 3077
  • [12] Investigation of the bulk Nd60-xDyxFe30Al10 (x=0,2,5) amorphous alloys
    Xu, H
    Tan, XH
    Qi, NN
    Wang, Q
    Dong, YD
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 3393 - 3396
  • [13] Phase Evolution of the AlxNbTiVZr (x=0; 0.5; 1; 1.5) High Entropy Alloys
    Yurchenko, Nikita Y.
    Stepanov, Nikita D.
    Tikhonovsky, Mikhail A.
    Salishchev, Gennady A.
    METALS, 2016, 6 (12)
  • [14] Microstructure and hydrogen transport properties of (V90Cr5Al5)90Cu10 alloy membranes
    Liang, Xiao
    Huang, Feifei
    Xu, Songsong
    Guo, Jingjie
    Liu, Dongmei
    Li, Xinzhong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 938
  • [15] Influence of phase composition on microstructure and properties of Mg-5Al-0.4Mn-xRE (x=0, 3 and 5 wt.%) alloys
    Braszczynska-Malik, K. N.
    Grzybowska, A.
    MATERIALS CHARACTERIZATION, 2016, 115 : 14 - 22
  • [16] Phase formation and microstructural evolution during sintering of Al-Zn-Mg-Cu alloys
    Mohammadi, M. Shah
    Simchi, A.
    Gierl, C.
    POWDER METALLURGY, 2010, 53 (01) : 62 - 70
  • [17] Microstructure and magnetic microstructure of the Pr60Al10Ni10Cu20-xFex (x=0, 4, 10, 15, 18) alloys observed by magnetic force microscopy
    Pang, ZY
    Han, SH
    Wang, YT
    Wang, WH
    Han, BS
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2005, 288 : 478 - 482
  • [18] Evolution of primary Si phase, surface roughness and mechanical properties of hypereutectic Al-Si alloys with different Si contents and cooling rates
    Zeng, Jie
    Zhu, Chenyang
    Wang, Wanlin
    Li, Xia
    Li, Hualong
    PHILOSOPHICAL MAGAZINE LETTERS, 2020, 100 (12) : 581 - 587
  • [19] Crystallization and Corrosion Resistance of (Fe0.78Si0.09B0.13)100-xNix (x=0, 2 and 5) Glassy Alloys
    Ma, Haijian
    Wang, Weimin
    Zhang, Jie
    Li, Guihua
    Cao, Chongde
    Zhang, Hongdi
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2011, 27 (12) : 1169 - 1177
  • [20] Effect of Cu content on the microstructure evolution and fracture behavior of Al-Mg-Si-xCu (x=0, 1, 2 and 4 wt.%) alloys
    Rahman, Tanzilur
    Rahman, Saadman Sakib
    Ashraf, Md Zurais Ibne
    Ibn Muneer, Khalid
    Al Rashed, H. M. Mamun
    MATERIALS RESEARCH EXPRESS, 2017, 4 (10):
12345