Alloy design of welding filler metal for 9Cr/2.25Cr dissimilar welded joint and mechanical properties investigation

被引:0
|
作者
Yifei Li
Kejian Li
Zhipeng Cai
Jiluan Pan
Xia Liu
Peng Wang
机构
[1] Tsinghua University,Department of Mechanical Engineering
[2] Tsinghua University,State Key Laboratory of Tribology
[3] Tsinghua University,Collaborative Innovation Center of Advanced Nuclear Energy Technology
[4] Shanghai Turbine Plant of Shanghai Electric Power Generation Equipment Co. Ltd.,Technology Development Department
来源
Welding in the World | 2018年 / 62卷
关键词
Alloy design; Welding filler metal; Heat-resistant material; Dissimilar welded joint; Carbon migration; Mechanical property;
D O I
暂无
中图分类号
学科分类号
摘要
In the work, a 5%Cr weld metal for the 9Cr/2.25Cr dissimilar welded joint was designed. The creep rupture, tensile, and impact behaviors of the weld metal and welded joint were tested and compared with those of the dissimilar welded joint with the 2.25%Cr weld metal. The result showed that the alloy design of the 5%Cr weld metal had a significant effect on reducing the degree of carbon migration at the joint interface. The interfacial creep damage and early failure tendency were reduced greatly. V and Nb in combination with N were added to enable creep strength at elevated temperatures by the formation of MX particles. Creep rupture tests at 540 °C showed good agreement with the alloy design, and no failures were observed in the weld metal for long-term cross-weld creep specimens, indicating that the newly designed 5%Cr weld metal was of adequate creep strength for use with dissimilar welded joint. The excellent tensile strength and adequate toughness showed good agreement with the rationality of tempering parameters.
引用
收藏
页码:1137 / 1151
页数:14
相关论文
共 50 条
  • [41] Investigation on creep behavior of welded joint of advanced 9%Cr steels
    Donghai Meng
    Fenggui Lu
    Haichao Cui
    Yuming Ding
    Xinhua Tang
    Xin Huo
    Journal of Materials Research, 2015, 30 : 197 - 205
  • [42] Investigation on creep behavior of welded joint of advanced 9% Cr steels
    Meng, Donghai
    Lu, Fenggui
    Cui, Haichao
    Ding, Yuming
    Tang, Xinhua
    Huo, Xin
    JOURNAL OF MATERIALS RESEARCH, 2015, 30 (02) : 197 - 205
  • [43] Analysis of microstructure and mechanical properties of dissimilar metal spot welded joint between magnesium alloy and steel
    Chen, Yiping
    Shao, Jinghui
    Hu, Dean
    Cheng, Donghai
    Hanjie Xuebao/Transactions of the China Welding Institution, 2013, 34 (04): : 101 - 104
  • [44] Effect of isothermal temper embrittlement and subsequent hydrogen embrittlement on tensile properties of 2.25Cr–1Mo–0.25V base metal and welded metal
    Zhi-peng Shen
    Wei Fu
    Ling-rui Kong
    Han-han Ma
    Xiao-hua He
    Xiao-chun Yu
    Chang-yu Zhou
    Journal of Iron and Steel Research International, 2021, 28 : 1426 - 1438
  • [45] Microstructural characteristics and mechanical properties of friction-stir-welded modified 9Cr–1Mo steel
    Shengli Li
    Xinqi Yang
    Feixiang Wang
    Wenshen Tang
    Huijun Li
    Journal of Materials Science, 2019, 54 : 6632 - 6650
  • [46] Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel
    Wiednig, C.
    Lochbichler, C.
    Enzinger, N.
    Beal, C.
    Sommitsch, C.
    STRUCTURAL INTEGRITY, 2014, 86 : 184 - 194
  • [47] Effect of Si on Microstructure and Mechanical Properties of a 9Cr Ferritic/Martensitic Steel
    Zhang, Qiankun
    Hu, Xiaofeng
    Jiang, Haichang
    Rong, Lijian
    ACTA METALLURGICA SINICA, 2024, 60 (09) : 1200 - 1212
  • [48] Role of stress in the high cycle fatigue behavior of advanced 9Cr/CrMoV dissimilarly welded joint
    Shao, Chendong
    Lu, Fenggui
    Li, Zhuguo
    Cai, Yan
    Wang, Peng
    Ding, Yuming
    JOURNAL OF MATERIALS RESEARCH, 2016, 31 (02) : 292 - 301
  • [49] Role of stress in the high cycle fatigue behavior of advanced 9Cr/CrMoV dissimilarly welded joint
    Chendong Shao
    Fenggui Lu
    Zhuguo Li
    Yan Cai
    Peng Wang
    Yuming Ding
    Journal of Materials Research, 2016, 31 : 292 - 301
  • [50] Microstructures and Mechanical Properties of Friction Stir Welded 2.25Cr-1Mo Steel
    Choi, Don-Hyun
    Ahn, Byung-Wook
    Yeon, Yun-Mo
    Jung, Seung-Boo
    MATERIALS TRANSACTIONS, 2012, 53 (05) : 1022 - 1025