Influence of cutting temperature on carbon fiber-reinforced plastic composites in high-speed machining

被引：0
作者：
Seok Jae Ha
Ki Beom Kim
Ji Kyung Yang
Myeong Woo Cho
机构：
[1] Inha University,Department of Mechanical Engineering
来源：
Journal of Mechanical Science and Technology | 2017年 / 31卷
关键词：
CFRP (Carbon fiber-reinforced plastic); Composites; Cutting; Temperature; Epoxy; Surface;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Carbon fiber-reinforced plastic (CFRP) composites have been widely used in many industries, including aerospace, automobiles, medical devices, and building materials, because of their good material properties, such as weight, rigidity, strength, and wear resistance. We experimentally evaluated the high-speed machining characteristics of CFRP composites. First, dry-cutting experiments were performed to test prepared CFRP specimens. Above a certain cutting speed, the epoxy matrix melted owing to the heat caused by the friction between the tool and specimen. Next, high-speed cutting experiments were performed at a low temperature (approximately -20 °C). Many sensors were used to investigate the characteristics of the high-speed cutting process, and the results were analyzed.
引用
收藏
页码：1861 / 1867
页数：6
相关论文
共 20 条
  • [1] Abrate S.(1992)Machining of composite materials, Part I: Traditional methods Compos Manuf. 3 75-83
  • [2] Walton D. A.(2016)Machining of carbon fiber reinforced plastics /polymers: A literature review J. Manuf. Sci. Eng. 136 1-22
  • [3] Che D.(2002)Machining of composite materials CIRP Ann -Manuf. Technol. 51 611-634
  • [4] Teti R.(2004)Cutting temperatures and their effects on the machining behaviour in drilling reinforced plastic composites Adv. Eng. Mater. 6 684-689
  • [5] Weinert K.(2005)Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments J. Mater Process Technol. 160 160-167
  • [6] Kempmann C.(2013)Machinability study of glass fibre-reinforced polymer composites during end milling The International J. of Advanced Manufacturing Technology 64 247-261
  • [7] Davim J. P.(2013)International journal of machine tools & manufacture temperature measurement of cutting tool and machined surface layer in milling of CFRP Int. J. Mach. Tools Manuf. 70 63-69
  • [8] Reis P.(2011)A study on the machinability of carbon fiber reinforced plastics on tool shape J. Korean Soc. Manuf. Technol. Eng. 20 799-804
  • [9] Azmi A. I.(2012)Influence of cutting heat on quality of drilling of carbon/epoxy composites Mater. Manuf. Process 27 968-972
  • [10] Lin R. J. T.(2016)Study of delamination in the process helical milling of carbon fiber-reinforced polymer composite J. Sci. Technol. Compos. 2 51-58
12