Polyacrylonitrile/multi-walled carbon nanotubes/polyurethane electrospun nanofiber membranes for sports equipment

被引：0

作者：

Chunguan Zhao

Xiufang Zhu

Junhao Li

Wen Qi

Yanzhi Zhao

Kaimeng Xu

Dingshan Yu

Ye Li

Juying Zhou

机构：

[1] Guangxi Minzu University,School of Chemistry and Chemical Engineering, Guangxi Minzu University, Key Laboratory of Chemistry and Engineering of Forest Products, State Ethnic Affairs Commission, Guangxi Key Laboratory of Chemistry and Engineering of Forest

[2] Hubei University of Automotive Technology,School of Material Science and Engineering

[3] Southwest Forestry University,Yunnan Provincial Key Laboratory of Wood Adhesives and Glued Products, International Joint Research Center for Biomass Materials

[4] Sun Yat-Sen University,Key Laboratory for Polymeric Composite and Functional Materials of Ministry of Education, Key Laboratory of High Performance Polymer

[5] University of Tennessee,Based Composites of Guangdong Province, School of Chemistry

来源：

Advanced Composites and Hybrid Materials | 2024年 / 7卷

关键词：

Electrospun; Nanofiber membrane; Thermoplastic polyurethane; Composite materials; Tensile properties;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The polyacrylonitrile/multi-walled carbon nanotubes nanofiber membranes with different orientations were prepared from acidified multi-walled carbon nanotubes (MWCNTs) and polyacrylonitrile (PAN) by innovative electrospun and hot stretching methods. It was found that PAN/MWCNTs has the best tensile properties when the content of carbon nanotubes was 0.5%, which was about 24% higher than that of pure PAN nanofiber membrane. The PAN/MWCNTs nanofiber membrane and thermoplastic polyurethane (TPU) composite was prepared with immersion method. MWCNTs can enhance the tensile properties of PAN nanofiber membrane and the thermoplastic composite materials. The modulus and tensile strength of the composite increase, while the elongation at break decreases with the increasing of orientation and hot stretching processing.

引用

共 127 条

[1]

Zhang L(2007)Small size and large effect of nanotechnology Hi-Tech Ind 3 28-29

[2]

Yang S(2023)Electrostatic self-assembly cellulose nanofibers/MXene/nickel chains for highly stable and efficient seawater evaporation and purification Carbon Lett 33 2063-2074

[3]

Shi C(2023)Initiating binary metal oxides microcubes electromagnetic wave absorber toward ultrabroad absorption bandwidth through interfacial and defects modulation Nano-Micro Lett 15 220-234

[4]

Qu KQ(2023)An overview of metal-organic frameworks and their magnetic composites for the removal of pollutants Sep Purif Technol 320 124144-124175

[5]

Li FS(2009)Research progress of electrostatic spinning Synthetic Fiber Ind 32 44-47

[6]

Wu NN(2023)High-conductivity nickel shells encapsulated wood-derived porous carbon for improved electromagnetic interference shielding Carbon 213 118208-118220

[7]

Hideo KH(2023)Research progress of MXenes and layered double hydroxides for supercapacitors Inorg Chem Front 10 4358-4392

[8]

Wang CJ(2023)Impact mechanisms of aggregation state reguation strategies on the microwave absorption properties of flexible polyaniline J Colloid Interface Sci 651 494-503

[9]

Liu XL(2023)Durable washable wearable antibacterial thermoplastic polyurethane/carbon nanotube@silver nanoparticles electrospun membrane strain sensors by multi-conductive network Adv Compos Hybrid Mater 6 101-1225

[10]

Yang TH(2021)Electrospun PVDF/PAN membrane for pressure sensor and sodium-ion battery separator Adv Compos Hybrid Mater 4 1215-259

← 1 2 3 4 5 6 7 8 9 10 →