Modelling of kinetic friction in V-bending of ultra-high-strength steel sheets

The Stribeck friction model was investigated in this study to predict springback of high-strength steel sheets. The coefficient of friction in Stribeck curve depends on sliding velocity and contact pressure. The plane-strain bending process is simulated in ABAQUS/Standard. The influence of forming speed, over-pressing and holding time on springback behaviour of sheets was studied numerically. By plotting the variation of bending angle with punch stroke, we found that the loading curve of finite element analysis showed similar results to the experiments. The unloading curves of FE analysis with friction models based on Stribeck curve and Coulomb law showed good agreement with experiments with error less than 1.5%. Forming speed of up to 50 mm/s does not have significant effect on springback. The effect of holding time on reducing springback is small, but over-press has large effect on reducing springback. The results showed that Stribeck model is suitable for sheet metal forming simulations, especially at higher forming speeds and pressures.