Two Atmospheric-pressure Plasma Sources for Polymer Surface Modification

被引：0
|
作者：
Shujun Yang
Hong Yin
机构：
[1] Old Dominion University,Applied Research Center
[2] Auburn University,Department of Chemistry and Biochemistry
来源：
Plasma Chemistry and Plasma Processing | 2007年 / 27卷
关键词：
Plasma; Surface; Modification; PET;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Two atmospheric-pressure plasma sources were studied. One was a helium plasma generated by a RF discharge, and the other was an air plasma generated by a dielectric barrier discharge (DBD). The two plasma sources were characterized on electron density, emission spectrum, and ozone density. The modification of polyethyleneterephthalate (PET) surfaces by the two plasmas was investigated. PET strips were exposed to the plasma at the exit of the plasma source. Water contact angles were measured for surfaces modified with different processing parameters. The change in contact angles was monitored as a function of time. Modification mechanisms were also investigated.
引用
收藏
页码：23 / 33
页数：10
相关论文
共 50 条
  • [41] Arrayed multiple atmospheric-pressure plasma jet sources for active stealth
    Ouyang, Wenchong
    Ding, Chengbiao
    Liu, Qi
    Lu, Quanming
    Wu, Zhengwei
    CELL REPORTS PHYSICAL SCIENCE, 2023, 4 (12):
  • [42] Effect of atmospheric-pressure plasma irradiation on the surface tension of water
    Shirai, Naoki
    Kaneko, Takuma
    Takamura, Yuto
    Sasaki, Koichi
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2022, 55 (15)
  • [43] Influence of atmospheric-pressure plasma treatment on surface of polyimide film
    Park, Soo-Jin
    Lee, Eun-Jung
    Kwon, Soo-Han
    NANOCOMPOSITES AND NANOPOROUS MATERIALS, 2007, 119 : 123 - +
  • [44] Basic Characteristics for PEN Film Surface Modification Using Atmospheric-Pressure Nonequilibrium Microwave Plasma Jet
    Yuji, Toshifumi
    Urayama, Takuya
    Fujii, Shuitsu
    Iijima, Yoshitoki
    Suzaki, Yoshifumi
    Akatsuka, Hiroshi
    ELECTRONICS AND COMMUNICATIONS IN JAPAN, 2010, 93 (05) : 42 - 49
  • [45] Modeling of atmospheric-pressure plasma columns sustained by surface waves
    Kabouzi, Y.
    Graves, D. B.
    Castanos-Martinez, E.
    Moisan, M.
    PHYSICAL REVIEW E, 2007, 75 (01):
  • [46] Surface modification of polyester fabrics by atmospheric-pressure air/He plasma for color strength and adhesion enhancement
    Zhang, Chunming
    Zhao, Meihua
    Wang, Libing
    Qu, Lijun
    Men, Yajing
    APPLIED SURFACE SCIENCE, 2017, 400 : 304 - 311
  • [47] Generation and Characterization of an Atmospheric-Pressure Plasma Jet (APPJ) and Its Application in the Surface Modification of Polyethylene Terephthalate
    Baniya H.B.
    Shrestha R.
    Guragain R.P.
    Kshetri M.B.
    Pandey B.P.
    Subedi D.P.
    International Journal of Polymer Science, 2020, 2020
  • [48] Atmospheric-pressure surface-diffusion dielectric-barrier discharge (SDDBD) plasma surface modification of PEDOT:PSS
    Li, Te-En
    Tsai, Jui-Hsuan
    Cheng, I-Chun
    Hsu, Cheng-Che
    Chen, Jian-Zhang
    SYNTHETIC METALS, 2019, 256
  • [49] Surface hydrophilization of two polyester films by atmospheric-pressure plasma and ultraviolet excimer light exposures
    Gotoh, Keiko, 1600, Taylor and Francis Ltd. (29):
  • [50] Surface hydrophilization of two polyester films by atmospheric-pressure plasma and ultraviolet excimer light exposures
    Gotoh, Keiko
    Nagai, Yu
    Yonehara, Yuri
    Kobayashi, Yasuyuki
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2015, 29 (06) : 473 - 486
12345