Two Atmospheric-pressure Plasma Sources for Polymer Surface Modification

被引：0
|
作者：
Shujun Yang
Hong Yin
机构：
[1] Old Dominion University,Applied Research Center
[2] Auburn University,Department of Chemistry and Biochemistry
来源：
Plasma Chemistry and Plasma Processing | 2007年 / 27卷
关键词：
Plasma; Surface; Modification; PET;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Two atmospheric-pressure plasma sources were studied. One was a helium plasma generated by a RF discharge, and the other was an air plasma generated by a dielectric barrier discharge (DBD). The two plasma sources were characterized on electron density, emission spectrum, and ozone density. The modification of polyethyleneterephthalate (PET) surfaces by the two plasmas was investigated. PET strips were exposed to the plasma at the exit of the plasma source. Water contact angles were measured for surfaces modified with different processing parameters. The change in contact angles was monitored as a function of time. Modification mechanisms were also investigated.
引用
收藏
页码：23 / 33
页数：10
相关论文
共 50 条
  • [21] Surface modification of polyester fabrics for inkjet printing with atmospheric-pressure air/Ar plasma
    Zhang, Chunming
    Fang, Kuanjun
    SURFACE & COATINGS TECHNOLOGY, 2009, 203 (14): : 2058 - 2063
  • [22] Mechanisms behind surface modification of polypropylene film using an atmospheric-pressure plasma jet
    Shaw, David
    West, Andrew
    Bredin, Jerome
    Wagenaars, Erik
    PLASMA SOURCES SCIENCE & TECHNOLOGY, 2016, 25 (06):
  • [23] Plasma surface modification at atmospheric pressure
    Kusano, Yukihiro
    SURFACE ENGINEERING, 2009, 25 (06) : 415 - 416
  • [24] Low-temperature atmospheric-pressure plasma sources for plasma medicine
    Setsuhara, Yuichi
    ARCHIVES OF BIOCHEMISTRY AND BIOPHYSICS, 2016, 605 : 3 - 10
  • [25] The atmospheric-pressure plasma jet:: A review and comparison to other plasma sources
    Schütze, A
    Jeong, JY
    Babayan, SE
    Park, J
    Selwyn, GS
    Hicks, RF
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 1998, 26 (06) : 1685 - 1694
  • [26] PLASMA MODIFICATION OF POLYCARBONATE SURFACE BY ATMOSPHERIC PLASMA SOURCES
    Kelar, J.
    Homola, T.
    Krumpolec, R.
    Slavicek, P.
    Cernak, M.
    HAKONE XV: INTERNATIONAL SYMPOSIUM ON HIGH PRESSURE LOW TEMPERATURE PLASMA CHEMISTRY: WITH JOINT COST TD1208 WORKSHOP: NON-EQUILIBRIUM PLASMAS WITH LIQUIDS FOR WATER AND SURFACE TREATMENT, 2016, : 301 - 304
  • [27] Inorganic nanofilms for surface charge control on polymer surfaces by atmospheric-pressure plasma deposition
    Wang, Ruixue
    Lin, Haofan
    Gao, Yuan
    Ren, Chengyan
    Ostrikov, Kostya
    Shao, Tao
    JOURNAL OF APPLIED PHYSICS, 2017, 122 (23)
  • [28] Evolution of the Surface Wettability of PET Polymer upon Treatment with an Atmospheric-Pressure Plasma Jet
    Vesel, Alenka
    Zaplotnik, Rok
    Primc, Gregor
    Mozetic, Miran
    POLYMERS, 2020, 12 (01)
  • [29] Surface Treatment of Hydrophobic Polymers by Atmospheric-Pressure Plasma
    Iriyama, Yu
    JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY, 2010, 23 (04) : 599 - 603
  • [30] Polymer etching by atmospheric-pressure plasma jet and surface micro-discharge sources: Activation energy analysis and etching directionality
    Knoll, Andrew J.
    Luan, Pingshan
    Pranda, Adam
    Bruce, Robert L.
    Oehrlein, Gottlieb S.
    PLASMA PROCESSES AND POLYMERS, 2018, 15 (05)
12345