Investigation of Halloysite Nanotube Effect in Poly– (Lactic acid)/Hydroxyapatite Coatings on Ti–6Al–4V Biomedical Alloy

[1] Niinomi M(2008)Mechanical biocompatibilities of titanium alloys for biomedical applications J Mech Behav Biomed Mater 1 30-42

[2] Topuz M(2021)Titanium-based composite scaffolds reinforced with hydroxyapatite-zirconia: production, mechanical and in-vitro characterization J Mech Behav Biomed Mater 118 104480-361

[3] Dikici B(2015)Mechanical properties and cytocompatibility of oxygen-modified β-type Ti-Cr alloys for spinal fixation devices Acta Biomater 12 352-36

[4] Gavgali M(2005)Corrosion resistance and biocompatibility of Ti-Ta alloys for biomedical applications Mater Sci Eng A 398 28-4479

[5] Liu H(2021)Processing of Ti/(HA + ZrO2) biocomposite and 50% porous hybrid scaffolds with low Young’s modulus by powder metallurgy: comparing of structural, mechanical, and corrosion properties Mater Today Commun 102 4473-724

[6] Niinomi M(2014)Biocompatibility improvement of titanium implants by coating with hybrid materials synthesized by sol-gel technique J Biomed Mater Res - Part A 87 713-462

[7] Nakai M(2018)Synthesis of biphasic calcium phosphate (BCP) coatings on β–type titanium alloys reinforced with rutile-TiO2 compounds: adhesion resistance and in-vitro corrosion J Sol-Gel Sci Technol 54 457-51

[8] Zhou YL(2018)Synthesis and characterization of hydroxyapatite/TiO2 coatings on the β-type titanium alloys with different sintering parameters using Sol-Gel Method Prot Met Phys Chem Surfaces 2021 46-733

[9] Niinomi M(2021)Challenges in the production of titanium–based Scaffolds bio–functionalized with hydroxyapatite by powder metallurgy technique Eur J Sci Technol 8 721-894

[10] Akahori T(2022)Effect of ZrO2 on morphological and adhesion properties of hydroxyapatite reinforced poly– (lactic) acid matrix hybrid coatings on mg substrates Res Eng Struct Mater 32 882-365

[1] Niinomi M(2008)Mechanical biocompatibilities of titanium alloys for biomedical applications J Mech Behav Biomed Mater 1 30-42

[2] Topuz M(2021)Titanium-based composite scaffolds reinforced with hydroxyapatite-zirconia: production, mechanical and in-vitro characterization J Mech Behav Biomed Mater 118 104480-361

[3] Dikici B(2015)Mechanical properties and cytocompatibility of oxygen-modified β-type Ti-Cr alloys for spinal fixation devices Acta Biomater 12 352-36

[4] Gavgali M(2005)Corrosion resistance and biocompatibility of Ti-Ta alloys for biomedical applications Mater Sci Eng A 398 28-4479

[5] Liu H(2021)Processing of Ti/(HA + ZrO2) biocomposite and 50% porous hybrid scaffolds with low Young’s modulus by powder metallurgy: comparing of structural, mechanical, and corrosion properties Mater Today Commun 102 4473-724

[6] Niinomi M(2014)Biocompatibility improvement of titanium implants by coating with hybrid materials synthesized by sol-gel technique J Biomed Mater Res - Part A 87 713-462

[7] Nakai M(2018)Synthesis of biphasic calcium phosphate (BCP) coatings on β–type titanium alloys reinforced with rutile-TiO2 compounds: adhesion resistance and in-vitro corrosion J Sol-Gel Sci Technol 54 457-51

[8] Zhou YL(2018)Synthesis and characterization of hydroxyapatite/TiO2 coatings on the β-type titanium alloys with different sintering parameters using Sol-Gel Method Prot Met Phys Chem Surfaces 2021 46-733

[9] Niinomi M(2021)Challenges in the production of titanium–based Scaffolds bio–functionalized with hydroxyapatite by powder metallurgy technique Eur J Sci Technol 8 721-894

[10] Akahori T(2022)Effect of ZrO2 on morphological and adhesion properties of hydroxyapatite reinforced poly– (lactic) acid matrix hybrid coatings on mg substrates Res Eng Struct Mater 32 882-365