Finite element cooling simulations of conformal cooling hybrid injection molding tools manufactured by selective laser melting

被引:0
作者
Boussad Abbès
Fazilay Abbès
Hichem Abdessalam
Aditya Upganlawar
机构
[1] GRESPI,
[2] University of Reims Champagne-Ardenne,undefined
[3] UFR SEN,undefined
来源
The International Journal of Advanced Manufacturing Technology | 2019年 / 103卷
关键词
Selective laser melting (SLM); Additive manufacturing (AM); Finite element simulation; Conformal cooling; Injection molding;
D O I
暂无
中图分类号
学科分类号
摘要
This paper presents an application of additive manufacturing (AM) technology that is suitable for manufacturing injection molding tools with conformal cooling channels to increase productivity. The design and the manufacturing of a hybrid injection molding insert by combining machining and selective laser melting (SLM) technologies was analyzed. A simplified finite element cooling analysis was used to compare conventional and hybrid solutions for the design of cooling channels to decrease the injection cycle time of an automotive plastic part. The simulation results showed that, by using a hybrid steel/high-conductivity copper alloy with conventional cooling for the design of the mold insert, the injection cycle time can be reduced by 50.3%, and by using hybrid steel/steel with conformal cooling, the injection cycle time can be reduced by 65.6%. The hybrid injection molding insert with conformal cooling made by selective laser melting (SLM) technology was successfully tested under real production conditions confirming the significant reduction of the injection cycle time.
引用
收藏
页码:2515 / 2522
页数:7
相关论文
共 45 条
[11]  
Shayfull Z(2017)Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting Int J Adv Manuf Technol 93 881-900
[12]  
Sharif S(2014)SLM tooling for die casting with conformal cooling channels Int J Adv Manuf Technol 71 573-583
[13]  
Zain AM(2017)Cooling simulation of conformal cooling injection mould insert produced by hybrid manufacturing Tehnički vjesnik 24 981-986
[14]  
Ghazali MF(2016)Development of a hybrid multi-tasking machine tool: integration of additive manufacturing technology with CNC machining Procedia CIRP 42 81-86
[15]  
Mohd Saad R(2002)Optimization of cooling systems in injection molds by an easily applicable analytical model J Reinf Plast Compos 21 451-459
[16]  
Wang Y(1933)A method of correlating forced convection heat transfer data and a comparison with fluid friction Trans AIChE 29 174-210
[17]  
Yu KM(undefined)undefined undefined undefined undefined-undefined
[18]  
Wang CCL(undefined)undefined undefined undefined undefined-undefined
[19]  
Marques S(undefined)undefined undefined undefined undefined-undefined
[20]  
Souza AF(undefined)undefined undefined undefined undefined-undefined