Multi-response Optimization of WEDM Parameters Using an Integrated Approach of RSM–GRA Analysis for Pure Titanium

被引：58

作者：

Chaudhari R. ^{[1
]}

Vora J. ^{[1
]}

Parikh D.M. ^{[2
]}

Wankhede V. ^{[2
]}

Khanna S. ^{[3
]}

机构：

[1] Department of Mechanical Engineering, Pandit Deendayal Petroleum University, Gandhinagar

[2] Department of Industrial Engineering, Pandit Deendayal Petroleum University, Gandhinagar

[3] Department of Solar Energy, Pandit Deendayal Petroleum University, Gandhinagar

来源：

Journal of The Institution of Engineers (India): Series D | 2020年 / 101卷 / 01期

关键词：

ANOVA; Grey relational analysis; Pure titanium; RSM; SEM; WEDM;

D O I：

10.1007/s40033-020-00204-7

中图分类号：

学科分类号：

摘要：

Wire electrical discharge machining is widely used in the application where precision is of prime importance, especially for conductive materials. In this study, central composite design of response surface methodology is implemented to design the experiments for optimization of WEDM process parameter on pure titanium. The identified input process variables are pulse on time (Ton), discharge current and pulse off time (Toff), while surface roughness and material removal rate are the output variables. ANOVA was used to study significance and non-significance factors. Grey relational analysis has been used for obtaining an optimal parameter setting for WEDM process to maximize the cutting rate while reducing surface roughness for pure titanium, which is the most preferred material for aerospace and biomedical application. The optimized process parameters were found at Ton of 6 µs, Toff of 4 µs and discharge current of 6 A after implementing GRA technique. A very close relation has been obtained at an optimal condition using GRA after the validation trial. © 2020, The Institution of Engineers (India).

引用

页码：117 / 126

页数：9

共 17 条

[1]

Leyens C., Hausmann J., Kumpfert J., Titanium and Titanium Alloys, (2003)

[2]

Zhu L., Guan Y., Wang Y., Xie Z., Lin J., Influence of process parameters of ultrasonic shot peening on surface nanocrystallization and hardness of pure titanium, Int. J. Adv. Manuf. Technol., 89, 5-8, pp. 1451-1468, (2017)

[3]

Leyens C., Peters M., Titanium and Titanium Alloys: Fundamentals and Applications, (2003)

[4]

Niinomi M., Recent research and development in titanium alloys for biomedical applications and healthcare goods, Sci. Technol. Adv. Mater., 4, 5, (2003)

[5]

Maciel D.T., Ribeiro Filho S.L.M., Lauro C.H., Brandao L.C., Characteristics of machined and formed external threads in titanium alloy, Int. J. Adv. Manuf. Technol., 79, 5-8, pp. 779-792, (2015)

[6]

Chaudhari R., Et al., Pareto optimization of WEDM process parameters for machining a NiTi shape memory alloy using a combined approach of RSM and heat transfer search algorithm, Adv. Manuf., (2015)

[7]

Jain V.K., Advanced Machining Processes, (2009)

[8]

Chaudhari R., Et al., Multi-response optimization of WEDM process parameters for machining of superelastic nitinol shape-memory alloy using a heat-transfer search algorithm, Materials, 12, 8, (2019)

[9]

Liao Y., Chu Y., Yan M., Study of wire breaking process and monitoring of WEDM, Int. J. Mach. Tools Manuf., 37, 4, pp. 555-567, (1997)

[10]

Hourmand M., Farahany S., Sarhan A.A., Noordin M.Y., Investigating the electrical discharge machining (EDM) parameter effects on Al–Mg<sub>2</sub>Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR–RSM approach, Int. J. Adv. Manuf. Technol., 77, 5-8, pp. 831-838, (2015)

← 1 2 →