Improving the Characteristics of Powder-In-Tube MgB2 Superconductor Fabricated Using the Extrusion Technique

被引:0
作者
A. Athanasiou-Ioannou
I. D. Theodorakopoulos
机构
[1] National Technical University of Athens,Manufacturing Technology Division, Mechanical Engineering Department
来源
Journal of Superconductivity and Novel Magnetism | 2014年 / 27卷
关键词
Powder in tube; MgB; superconductor; Magnetisation characteristics; Critical current density;
D O I
暂无
中图分类号
学科分类号
摘要
High-density cylindrical MgB2 superconductors were manufactured using an ex situ powder in tube extrusion technique. The superconducting properties of the steel-sheathed MgB2 samples were examined with respect to their magnetisation responses, critical temperature and current density. The critical current density of the superconductor was determined by means of magnetisation measurements using Bean’s critical state model. Jc reached a maximum of 4×105 A/cm2 at 5 K.
引用
收藏
页码:1041 / 1047
页数:6
相关论文
共 50 条
  • [31] The improvement of in-situ powder in tube MgB2 tapes by mixing MgB2 to the starting powder of MgH2 and B
    Nakane, T
    Fujii, H
    Matsumoto, A
    Kitaguchi, H
    Kumakura, H
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2005, 426 : 1238 - 1243
  • [32] Texture characterization of powder-in-tube Ti/MgB2superconducting cables
    Melone, Mauro
    Cabrera, Analia
    Malachevsky, Maria T.
    Malamud, Florencia
    Vizcaino, Pablo
    Bianchi, Daniel
    Serquis, Adriana
    MATERIALS TODAY-PROCEEDINGS, 2019, 14 : 168 - 171
  • [33] Pinning behaviour of carbon black reinforced MgB2 superconductor fabricated by field assisted sintering technique
    Agil, Hasan
    Agil, Asli Asiye
    Ayas, Erhan
    JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 2024, 189
  • [34] Significant improvement in superconducting properties of in situ powder-in-tube MgB2 wires through anthracene doping and heat treatment optimization
    Li, Chunyan
    Suo, Hongli
    Ma, Lin
    Yang, Liangqun
    Maeda, Minoru
    Patel, Dipak
    Matsumoto, Akiyoshi
    Kumakura, Hiroaki
    SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2019, 32 (10)
  • [35] Enhancement of the critical current density of in-situ powder-in-tube processed MgB2 wires with both xylene and SiC addition
    Zhang, Y. C.
    Matsumoto, A.
    Togano, K.
    Takano, Y.
    Kumakura, H.
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2018, 551 : 5 - 9
  • [36] Improvement in microstructure and superconducting properties of single-filament powder-in-tube MgB2 wires by cold working with a swaging machine
    Saito, Yusuke
    Murakami, Masato
    Matsumoto, Akiyoshi
    Kumakura, Hiroaki
    SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2017, 30 (06)
  • [37] Qualitative comparative analysis of MgB2 powder-in-tube wires: superconductivity and X-ray cone-bean microtomography
    Badica, P.
    Tiseanu, I.
    Aldica, G.
    Craciunescu, T.
    Sandu, V.
    Jakob, G.
    Rindfleisch, M.
    JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, 2015, 17 (11-12): : 1636 - 1649
  • [38] Investigation on MgB2 superconductor doped by nano-A1 powder
    Xu, H. L.
    Feng, Y.
    Zhao, Y.
    Yan, G.
    Pu, M. H.
    Lu, H. X.
    Zhang, R.
    Xu, Z.
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2006, 449 (01): : 53 - 56
  • [39] Microstructure and Jc-B performance of powder-in-tube MgB2 wire made by using Mg2Cu powders with low melting point
    Kikuchi, A
    Iijima, Y
    Banno, N
    Takeuchi, T
    Inoue, K
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2005, 15 (02) : 3207 - 3210
  • [40] Drawing induced texture and the evolution of superconductive properties with heat treatment time in powder-in-tube in situ processed MgB2 strands
    Susner, M. A.
    Daniels, T. W.
    Sumption, M. D.
    Rindfleisch, M. A.
    Thong, C. J.
    Collings, E. W.
    SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2012, 25 (06)