Microfibril angle and density of hinoki (Chamaecyparis obtusa) trees in 15 half-sib families in a progeny test stand in Kyushu, Japan

It was previously believed in Japan that the wood qualities of hinoki (Chamaecyparis obtusa) were superior to sugi (Cryptomeria japonica). However, few studies of wood properties such as MFA (microfibril angle of S2 layer in secondary wall of tracheid) have been completed for hinoki. Some reports have found that hinoki plus tree families have similar mechanical properties to sugi. Here we report the characteristics of MFA and density of hinoki half-sib families in a progeny test stand. There were significant differences in MFA and density between families. The wood properties of two families, Nakatsu 3 and Kanzaki 5, are stable in radial pattern and suitable for structural use. Early selection of hinoki families by MFA and density may be difficult. Effects of MFA and density on Ed (dynamic modulus of elasticity) of logs differed between families. The effects of growth rate on MFA and density differed between families and also between juvenile and mature wood. The faster growth rate in Nakatsu 3 appeared to improve wood properties and increase Ed of logs, although in many other families, faster growth rate had negative effects on desirable wood properties for structural use.