Effect of pH, ionic strength, foreign ions and temperatures on the sorption of Eu(III) on attapulgite-iron oxide magnetic composites

In this paper, the attapulgite-iron oxide magnetic composites were synthesized by coprecipitation method and were characterized by SEM, XRD and FTIR in detail. The characterization results indicated that the iron oxide was successfully formed on the surface of attapulgite. The prepared attapulgite-iron oxide magnetic composites were applied as adsorbents to remove Eu(III) from aqueous solutions by using batch sorption experiments under different experimental conditions. The sorption properties of Eu(III) on bare attapulgite were also performed as comparison. The results indicated that the sorption of Eu(III) on attapulgite-iron oxide magnetic composites was strongly dependent on pH and temperature. The attapulgite-iron oxide magnetic composites can be separated from aqueous solutions using magnetic separation method in large scale. At low pH values, the sorption of Eu(III) was influenced by ionic strength and pH obviously, while the sorption of Eu(III) was not affected by ionic strength at high pH values. The sorption of Eu(III) was dominated by ion exchange or outer-sphere surface complexation at low pH values, and mainly by inner-sphere surface complexation at high pH values. The thermodynamic parameters (i.e., ∆G°, ∆S°, ∆H°) calculated from the temperature dependent sorption isotherms indicated that the sorption of Eu(III) on attapulgite-iron oxide magnetic composites was an endothermic and spontaneous process. Although the sorption capacities of Eu(III) on attapulgite-iron oxide magnetic composites were a little lower than those of Eu(III) on bare attapulgite, the magnetic separation in large scale is suitable for the application of the magnetic composites in the preconcentration of Eu(III) from large volumes of aqueous solutions in possible real applications.