Compressive and flexural properties of hemp fiber reinforced concrete

被引：0
|
作者：
Zhijian Li
Lijing Wang
Xungai Wang
机构：
[1] Deakin University,School of Engineering and Technology
来源：
Fibers and Polymers | 2004年 / 5卷
关键词：
Hemp; Fiber reinforced concrete (FRC); Mixing methods; Compressive and flexural properties;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The compressive and flexural properties of hemp fiber reinforced concretes (FRC) were examined in this paper. Natural hemp fiber was mixed using dry and wet mixing methods to fabricate the FRC. Mechanical properties of the FRC were investigated. The main factors affecting compressive and flexural properties of the FRC materials were evaluated with an orthogonal test design. Fiber content by weight has the largest effect. The method for casting hemp FRC has been optimised. Under the optimum conditions, compressive strength increased by 4 %, flexural strength increased by 9 %, flexural toughness increased by 144 %, and flexural toughness index increased by 214 %.
引用
收藏
页码：187 / 197
页数：10
相关论文
共 50 条
  • [41] Experimental Study on the Flexural Impact Properties of Fiber Reinforced Lightweight Aggregate Concrete
    Niu, Jiangang
    Wu, Bin
    Bao, Jian
    MATERIALS SCIENCE, CIVIL ENGINEERING AND ARCHITECTURE SCIENCE, MECHANICAL ENGINEERING AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2014, 488-489 : 696 - 699
  • [42] Properties and Mechanism on Flexural Fatigue of Polypropylene Fiber Reinforced Concrete Containing Slag
    张慧莉
    Journal of Wuhan University of Technology(Materials Science Edition), 2011, 26 (03) : 533 - 540
  • [43] Properties and Mechanism on Flexural Fatigue of Polypropylene Fiber Reinforced Concrete Containing Slag
    Zhang Huili
    Tian Kanliang
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2011, 26 (03): : 533 - 540
  • [44] Modelling and experimental validation of flexural tensile properties of steel fiber reinforced concrete
    Meng, Guowang
    Wu, Bo
    Xu, Shixiang
    Huang, Jingsong
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 273
  • [45] Properties and mechanism on flexural fatigue of polypropylene fiber reinforced concrete containing slag
    Huili Zhang
    Kanliang Tian
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2011, 26 : 533 - 540
  • [46] NUMERICAL STUDY ON FLEXURAL PROPERTIES OF PARTIALLY HIGH PERCENTAGE FIBER REINFORCED CONCRETE
    Zhang, Ya-Fang
    Liu, Hao
    Chen, Jiang-Ping
    PROCEEDINGS OF THE ELEVENTH INTERNATIONAL SYMPOSIUM ON STRUCTURAL ENGINEERING, VOL I AND II, 2010, : 473 - 477
  • [47] Flexural-tensile Properties of Layered Steel Fiber Reinforced Rubber Concrete
    Yi Xianren
    Fan Xiaochun
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2009, 24 (05): : 846 - 848
  • [48] EVALUATION OF PULLOUT TEST FOR ESTIMATING SHEAR, FLEXURAL, AND COMPRESSIVE STRENGTH OF FIBER REINFORCED SILICA FUME CONCRETE
    HORIGUCHI, T
    SAEKI, N
    FUJITA, Y
    ACI MATERIALS JOURNAL, 1988, 85 (02) : 126 - 132
  • [49] Influence of compressive strength and curing time of fiber reinforced concrete on its residual flexural tensile strength
    Witkowski, Pawel
    Kuczma, Mieczyslaw
    Demby, Michal
    Rudnicki, Tomasz
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2025, 19 (04) : 329 - 341
  • [50] Machine learning-based prediction for compressive and flexural strengths of steel fiber-reinforced concrete
    Kang, Min-Chang
    Yoo, Doo-Yeol
    Gupta, Rishi
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 266
12345