Multi-Objective Optimization for Structure Crashworthiness Based on Kriging Surrogate Model and Simulated Annealing Algorithm

被引：2

作者：

Sun X. ^{[1
,2
]}

Wang D. ^{[3
]}

Li R. ^{[1
]}

Zhang B. ^{[4
]}

机构：

[1] School of Engineering, Dali University, Dali, Yunnan

[2] Audi Sales Division, FAW-VW Automotive Co., Ltd., Changchun

[3] State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun

[4] Logistics Group, Jilin University, Changchun

来源：

Journal of Shanghai Jiaotong University (Science) | 2020年 / 25卷 / 06期

关键词：

crashworthiness; Kriging surrogate model (KSM); multi-objective optimization; simulated annealing algorithm; U; 462.3;

D O I：

10.1007/s12204-020-2223-y

中图分类号：

学科分类号：

摘要：

Multi-objective optimization of crashworthiness in automobile front-end structure was performed, and finite element model (FEM) was validated by experimental results to ensure that FEM can predict the response value with sufficient accuracy. Seven design variables and four crashworthiness indicators were defined. Through orthogonal design method, 18 FEMs were established, and the response values of crashworthiness indicators were extracted. By using the variable-response specimen matrix, Kriging surrogate model (KSM) was constructed to replace FEM to reflect the function correlation between variables and responses. The accuracy of KSM was also validated. Finally, the simulated annealing optimization algorithm was implemented in KSM to seek optimal and reliable solutions. Based on the optimal results and comparison analysis, the 9096-th iteration point was the optimal solution. Although the intrusion of firewall and the mass of optimal structure increased slightly, the vehicle acceleration of the optimal solution decreased by 6.9%, which effectively reduced the risk of occupant injury. © 2020, Shanghai Jiao Tong University and Springer-Verlag GmbH Germany, part of Springer Nature.

引用

页码：727 / 738

页数：11

共 39 条

[1] Eyvazian A., Habibi M K., Hamouda A M., Et al., Axial crushing behavior and energy absorption efficiency of corrugated tubes [J], Materials and Design, 54, pp. 1028-1038, (2014)
[2] Li Z.B., Chen R., Lu F.Y., Comparative analysis of crashworthiness of empty and foam-filled thin-walled tubes [J], Thin-Walled Structures, 124, pp. 343-349, (2018)
[3] Goyal S., Anand C S., Sharma S K., Et al., Crashworthiness analysis of foam filled star shape polygon of thin-walled structure [J], Thin-Walled Structures, 144, (2019)
[4] Tarlochan F., Samer F., Hamouda A M S., Et al., Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces [J], Thin-Walled Structures, 71, pp. 7-17, (2013)
[5] Cetin E., Baykasoglu C., Energy absorption of thin-walled tubes enhanced by lattice structures [J], International Journal of Mechanical Sciences, 157-158, pp. 471-484, (2019)
[6] Kilicaslan C., Numerical crushing analysis of aluminum foam-filled corrugated single- and double-circular tubes subjected to axial impact loading [J], Thin-Walled Structures, 96, pp. 82-94, (2015)
[7] Zarei H., Kroger M., Albertsen H., An experimental and numerical crashworthiness investigation of thermoplastic composite crash boxes [J], Composite Structures, 85, 3, pp. 245-257, (2008)
[8] Chen D.H., Ozaki S., Numerical study of axially crushed cylindrical tubes with corrugated surface [J], Thin-Walled Structures, 47, 11, pp. 1387-1396, (2009)
[9] Yin H F., Xiao Y Y., Wen G L., Et al., Crushing analysis and multi-objective optimization design for bionic thin-walled structure [J], Materials and Design, 87, pp. 825-834, (2015)
[10] Pirmohammad S., Esmaeili-Marzdashti S., Multi-objective optimization of multi-cell conical structures under dynamic loads [J], Journal of Central South University, 26, pp. 2464-2481, (2019)

← 1 2 3 4 →