Brazing of zirconia with AgCuTi and SnAgTi active filler metals

被引：0
|
作者：
T. H. Chuang
M. S. Yeh
Y. H. Chai
机构：
[1] National Taiwan University,the Institute of Materials Science and Engineering
[2] Chung-Hua University,the Department of Mechanical Engineering
[3] NEC Electronics,the Micro Design and Development Division
[4] Inc.,undefined
来源：
Metallurgical and Materials Transactions A | 2000年 / 31卷
关键词：
Contact Angle; Material Transaction; Exothermic Peak; Interfacial Reaction; Filler Metal;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The self-brazing of partially stabilized zirconia using Ag27Cu3Ti and Sn10Ag4Ti active filler metals is investigated. It was shown that the contact angles of Ag27Cu3Ti and Sn10Ag4Ti on zirconia decreased with the increase of brazing temperature and remained constant at about 34 deg and 44 deg above 900 °C, respectively. The flexural strengths were 227 and 137 MPa for ZrO2/Ag27Cu3Ti/ZrO2 and ZrO2/Sn10Ag4Ti/ZrO2, respectively, after brazing at 900 °C for 10 minutes.
引用
收藏
页码：1591 / 1597
页数：6
相关论文
共 50 条
  • [41] Development of Al-12Si-xTi system active ternary filler metals for Al metal matrix composites
    Zhang Gui-feng
    Su Wei
    Zhang Jian-xun
    Suzumura, A.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (03) : 596 - 603
  • [42] Low-melting-point titanium-base brazing alloys—part 1: Characteristics of two-, three-, and four-component filler metals
    E Chang
    C.-H Chen
    Journal of Materials Engineering and Performance, 1997, 6 : 792 - 796
  • [43] Reactive brazing Cf/SiC to itself and to Mo using the NiPdPtAu-Cr filler alloy
    Li, Wen-Wen
    Chen, Bo
    Xiong, Hua-Ping
    Zou, Wen-Jiang
    Ren, Hai-Shui
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2017, 37 (13) : 3849 - 3859
  • [44] Microstructural evolution at the bonding interface during the early-stage infrared active brazing of alumina
    R. K. Shiue
    S. K. Wu
    J. M. O
    J. Y. Wang
    Metallurgical and Materials Transactions A, 2000, 31 : 2527 - 2536
  • [45] Wetting and laser brazing of Zn-coated steel products by Cu–Si filler metal
    A. Koltsov
    N. Bailly
    L. Cretteur
    Journal of Materials Science, 2010, 45 : 2118 - 2125
  • [46] Vacuum Brazing Diamond Grits with Cu-based or Ni-based Filler Metal
    Qi, Wenchun
    Lu, Jinbin
    Li, Yang
    Xu, Shuai
    Zhong, Sujuan
    Wang, Bangfu
    Qiu, Xinkai
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (08) : 4112 - 4120
  • [47] Effect of introducing carbon fiber into AgCuTi filler on interfacial microstructure and mechanical property of C/C-TC4 brazed joints
    Liu, Duo
    Zhao, Kehan
    Song, Yanyu
    Zhang, Lei
    Song, Xiaoguo
    Long, Weimin
    MATERIALS CHARACTERIZATION, 2019, 157
  • [48] Investigation of contact phenomena at cubic boron nitride filler metal interface during electron beam brazing
    Pobol, IL
    Shipko, AA
    Nesteruk, IG
    DIAMOND AND RELATED MATERIALS, 1997, 6 (08) : 1067 - 1070
  • [49] INTERFACIAL REACTION BETWEEN ALUMINA AND CU-TI FILLER METAL DURING REACTIVE METAL BRAZING
    BANG, KS
    LIU, S
    WELDING JOURNAL, 1994, 73 (03) : S54 - S60
  • [50] Laser welding-brazing of alumina to 304 stainless steel with an Ag-based filler material
    Zhang, Yan
    Chen, YanKun
    Zhou, JianPing
    Sun, DaQian
    Li, HongMei
    METALLURGICAL RESEARCH & TECHNOLOGY, 2020, 118 (01)
12345