Brazing of zirconia with AgCuTi and SnAgTi active filler metals

被引：0
|
作者：
T. H. Chuang
M. S. Yeh
Y. H. Chai
机构：
[1] National Taiwan University,the Institute of Materials Science and Engineering
[2] Chung-Hua University,the Department of Mechanical Engineering
[3] NEC Electronics,the Micro Design and Development Division
[4] Inc.,undefined
来源：
Metallurgical and Materials Transactions A | 2000年 / 31卷
关键词：
Contact Angle; Material Transaction; Exothermic Peak; Interfacial Reaction; Filler Metal;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The self-brazing of partially stabilized zirconia using Ag27Cu3Ti and Sn10Ag4Ti active filler metals is investigated. It was shown that the contact angles of Ag27Cu3Ti and Sn10Ag4Ti on zirconia decreased with the increase of brazing temperature and remained constant at about 34 deg and 44 deg above 900 °C, respectively. The flexural strengths were 227 and 137 MPa for ZrO2/Ag27Cu3Ti/ZrO2 and ZrO2/Sn10Ag4Ti/ZrO2, respectively, after brazing at 900 °C for 10 minutes.
引用
收藏
页码：1591 / 1597
页数：6
相关论文
共 50 条
  • [1] Brazing filler metals
    Way, Matthew
    Willingham, Jack
    Goodall, Russell
    INTERNATIONAL MATERIALS REVIEWS, 2020, 65 (05) : 257 - 285
  • [2] Physical properties of selected brazing filler metals
    Arenas, MF
    Acoff, VL
    Reddy, RG
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2004, 9 (05) : 423 - 429
  • [3] Effect of Ag on the properties of solders and brazing filler metals
    He Wang
    Song-bai Xue
    Journal of Materials Science: Materials in Electronics, 2016, 27 : 1 - 13
  • [4] Microstructure and interfacial reactions of vacuum brazing titanium alloy to stainless steel using an AgCuTi filler metal
    Yue, X.
    He, P.
    Feng, J. C.
    Zhang, J. H.
    Zhu, F. Q.
    MATERIALS CHARACTERIZATION, 2008, 59 (12) : 1721 - 1727
  • [5] A preliminary study on filler metals for vacuum brazing of Al/Ti
    朱颖
    赵鹏飞
    康慧
    胡刚
    曲平
    China Welding, 2002, (02) : 38 - 40
  • [6] Brazing of titanium to steel with different filler metals: analysis and comparison
    Ahmed Elrefaey
    Wolfgang Tillmann
    Journal of Materials Science, 2010, 45 : 4332 - 4338
  • [7] Active Brazing of Silicon Carbide with Rapidly Quenched TiZrCuBe Filler Metal
    Fedotov, I., V
    Suchkov, A. N.
    Ivannikov, A. A.
    Chernavskaya, E. R.
    Dzhumaev, P. S.
    Sevryukov, O. N.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (10) : 4691 - 4701
  • [8] Active Brazing of Silicon Carbide with Rapidly Quenched TiZrCuBe Filler Metal
    I. V. Fedotov
    A. N. Suchkov
    A. A. Ivannikov
    E. R. Chernavskaya
    P. S. Dzhumaev
    O. N. Sevryukov
    Journal of Materials Engineering and Performance, 2023, 32 : 4691 - 4701
  • [9] Overview of nickel-based filler metals for brazing of austenitic stainless steels
    Penyaz, M. A.
    Ivannikov, A. A.
    Sevryukov, O. N.
    Kalin, B. A.
    NON-FERROUS METALS, 2021, (01): : 41 - 56
  • [10] Reliable brazing of SiBCN ceramic and TC4 alloy using AgCuTi filler with the assist of laser melting deposited FGM layers
    Shi, J. M.
    Zhang, L. X.
    Liu, H.
    Sun, Z.
    Feng, J. C.
    JOURNAL OF MATERIALS SCIENCE, 2019, 54 (04) : 2766 - 2778
12345