Cermet Plasma Coatings with Titanium Carbide

被引：3

作者：

Kalita V.I. ^{[1
]}

Komlev D.I. ^{[1
]}

Pribytkov G.A. ^{[2
]}

Baranovsky A.V. ^{[2
]}

Radyuk A.A. ^{[1
]}

Korzhova V.V. ^{[2
]}

Ivannikov A.Y. ^{[1
]}

Alpatov A.V. ^{[1
]}

Krinitsyn M.G. ^{[2
]}

Mikhaylova A.B. ^{[1
]}

机构：

[1] Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow

[2] Institute of Strength Physics and Materials Science, Siberian Branch, Russian Academy of Sciences, Tomsk

来源：

Inorganic Materials: Applied Research | 2019年 / 10卷 / 03期

基金：

俄罗斯基础研究基金会;

关键词：

and nitrogen in coatings; carbon; cermet S27 + 50 vol % TiC; content of oxygen; microhardness; plasma cermet coatings; S27; alloy;

D O I：

10.1134/S2075113319030134

中图分类号：

学科分类号：

摘要：

Abstract: High-grade iron S27 alloy and cermet S27 + 50 vol % TiC are sprayed in Ar-N2 plasma with local protection from the air with a nozzle application. Under S27 alloy spraying, the oxygen content in the coating increases from 0.32 to 0.98%, the nitrogen content increases from 0.038 to 0.15%, and the carbon content is reduced from 4.26 to 3.47%. In the cermet coatings, the oxygen content increases from 0.56 to 1.96%, the nitrogen content increases from 0.068 to 0.64%, and the carbon content is reduced from 10.5 to 8.19%. Changes in the structure and microhardness of the materials investigated depend on the C, O, and N content and the rate of consolidation of sprayed particles. © 2019, Pleiades Publishing, Ltd.

引用

页码：549 / 555

页数：6

共 50 条

[21] A comparative assessment on the characteristics of HVOF sprayed cermet coatings
Padmavathi, G.
Sarada, B. N.
Shanmuganatan, S. P.
Ramesha, H.
Padmini, B. V.
Krishnamurthy, R.
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2024, 22 (02) : 406 - 428
[22] Improvement in surface integrity of thermally sprayed cermet coatings
Singh, Parvinkal
Kumar, Pardeep
MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 4431 - 4436
[23] Wear performance of co-electrodeposited cermet coatings
Farrokhzad, M. A.
Saha, G. C.
Khan, T. I.
SURFACE & COATINGS TECHNOLOGY, 2013, 235 : 75 - 85
[24] Titanium carbide/carbon nanocomposite hard coatings: A comparative study between various chemical analysis tools
El Mel, A. A.
Gautron, E.
Christien, F.
Angleraud, B.
Granier, A.
Soucek, P.
Vasina, P.
Bursikova, V.
Takashima, M.
Ohtake, N.
Akasaka, H.
Suzuki, T.
Tessier, P. Y.
SURFACE & COATINGS TECHNOLOGY, 2014, 256 : 41 - 46
[25] Spark plasma processing of semi-conductive titanium carbide dispersed alumina composites
Ram Prakash, S.
Selvakumar, G.
Rajkumar, K.
MATERIALS AND MANUFACTURING PROCESSES, 2022, 37 (01) : 81 - 89
[26] Thermal stability of titanium nitride coatings prepared by the mixing technology with laser and plasma
Yu, Hanjiang
Tan, Tianya
Wu, Wei
Tian, Chao
An, Ying
Sun, Fengjiu
CURRENT APPLIED PHYSICS, 2012, 12 (01) : 152 - 154
[27] Titanium oxide coatings formed by plasma spraying followed by induction heat treatment
Koshuro, Vladimir
Osipova, Elena
Markelova, Olga
Fomina, Marina
Zakharevich, Andrey
Pichkhidze, Sergey
Fomin, Aleksandr
CERAMICS INTERNATIONAL, 2023, 49 (02) : 2034 - 2043
[28] Wear Resistance and Titanium Adhesion of Cathodic Arc Deposited Multi-Component Coatings for Carbide End Mills at the Trochoidal Milling of Titanium Alloy
Volosova, Marina A.
Fyodorov, Sergey, V
Opleshin, Stepan
Mosyanov, Mikhail
TECHNOLOGIES, 2020, 8 (03)
[29] Laser surface treatment of pure titanium: Microstructural analysis, wear properties, and corrosion behavior of titanium carbide coatings in Hank's physiological solution
Mohazzab, Behnaz Feizi
Jaleh, Babak
Fattah-alhosseini, Arash
Mahmoudi, Fatemeh
Momeni, Amir
SURFACES AND INTERFACES, 2020, 20
[30] Surface Analysis and Osteoblasts Response of a Titanium Oxi-Carbide Film Deposited on Titanium by Ion Plating Plasma Assisted (IPPA)
Mazzola, L.
Bemporad, E.
Misiano, C.
Pepe, F.
Santini, P.
Scandurra, R.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2011, 11 (10) : 8754 - 8762

← 1 2 3 4 5 →