Effect of the elastic modulus of a coating on the serviceability of the substrate-coating system

被引：8

作者：

Dolgov N.A. ^{[1
]}

机构：

[1] Institute of Problems of Strength, National Academy of Sciences of Ukraine, Kiev

来源：

Strength of Materials | 2002年 / 34卷 / 02期

关键词：

coating; elastic modulus; normal stresses; serviceability; substrate; tangential stresses;

D O I：

10.1023/A:1015362426688

中图分类号：

学科分类号：

摘要：

We study the effect of the elastic modulus of a coating on its strength and strain characteristics, as well as on the residual stresses in it. The tangential and normal stresses that occur in the substrate and coating depend on the elastic modulus of the latter. It has been concluded that when designing substrate-coating systems, one should try to seek the optimum ratio of their elastic properties. An original approach has been proposed to the deposition of protective structurally inhomogeneous coatings, in which, unlike functionally gradient materials, not the composition but the structure is varied continuously. © 2002 Plenum Publishing Corporation.

引用

页码：153 / 157

页数：4

共 13 条

[1]

Hasui A., Sputtering Technique, (1975)

[2]

Kawase R., Tanaka K., Hamanoto T., Haraguch H., Study on elastic constant and residual stress measurements during ceramic coating, Thermal Spray Research and Application (Proc. of the 3rd National Thermal Spray Conf.), pp. 339-342, (1990)

[3]

Kim H.J., Kweon Y.G., Elastic modulus of plasma-sprayed coatings determined by indentation and bend tests, Thin Sol. Films, 342, pp. 201-206, (1999)

[4]

Yu. A., Kharlamov, Prediction of the porosity of powder coatings, Poroshk. Metallurg., 12, pp. 36-41, (1990)

[5]

Getsov L.B., Materials and Strength of Gas Turbine Parts, (1996)

[6]

Tucker R.C., Structure property relationships in deposits produced by plasma spray and detonation gun techniques, J. Vac. Sci. Tech., 11, 4, pp. 725-734, (1974)

[7]

Umanskii E.S., Lyashenko B.A., Conditions for the adhesion and cohesion uniform strength of high-temperature coatings, Space Research in Ukraine [in Russian], Kiev, 6, pp. 58-64, (1975)

[8]

Stoney G.G., The tension of metallic films deposited by electrolysis, Proc. R. Soc. London Ser. A, 82, pp. 172-175, (1909)

[9]

Brenner A., Senderoff S., Calculation of stress in electrodeposits from the curvature of a plated strip, J. Res. Nat. Bur. Stand., 42, 2, pp. 105-123, (1949)

[10]

Fukui F., Yonekuda H., Watanabe Y., Nakanishi K., Evaluating of residual stress in a thick-walled ring for Al-SiC functionally gradient material, Trans. Jap. Soc. Mech. Eng., 60, 574, pp. 1384-1389, (1994)

← 1 2 →