Deformations and structure of metal during cold butt-seam welding of copper blanks

被引：0
|
作者：
Yu. N. Loginov
A. G. Illarionov
S. Yu. Klyueva
M. A. Ivanova
机构：
[1] Ural Federal University,
来源：
Russian Journal of Non-Ferrous Metals | 2012年 / 53卷
关键词：
copper; welding; deformation mode; structure;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Calculations by the finite element method are carried out for the deformation mode of copper blanks as they are being joined by cold welding. It is found that the degree of deformation in a shut is distributed nonuniformly and reaches 3–5. A metallographic analysis revealed the appearance of a zone of abrupt grain-size refinement in the region of a weld seam. A study of the distribution of microhardness showed an increase in this parameter up to 1000 MPa in the arrangement region of the weld seam with respect to 790MPa in the parent metal. The experimental data confirmed the computed characteristics.
引用
收藏
页码：45 / 53
页数：8
相关论文
共 50 条
  • [1] Deformations and structure of metal during cold butt-seam welding of copper blanks
    Loginov, Yu. N.
    Illarionov, A. G.
    Klyueva, S. Yu.
    Ivanova, M. A.
    RUSSIAN JOURNAL OF NON-FERROUS METALS, 2012, 53 (01) : 45 - 53
  • [2] BUTT-SEAM WELDING OF STEELS USING A FILLER WIRE
    PODOLA, NV
    LIPOVICH, GA
    YUDIN, IE
    AUTOMATIC WELDING USSR, 1975, 28 (03): : 47 - 48
  • [3] Deformations in Sheet Metal Seam Welding.
    Buchholz, Siegfried
    Luebeck, Karl Heinz
    Schweisstechnik Berlin, 1979, 29 (12): : 554 - 557
  • [4] COLD BUTT WELDING OF COPPER CONTACT LEADS
    BARANOV, IB
    AUTOMATIC WELDING USSR, 1968, 21 (08): : 61 - &
  • [5] MACHINE FOR COLD BUTT WELDING OF COPPER RINGS
    STROIMAN, IM
    KONDRATE.IN
    WELDING PRODUCTION, 1970, 17 (10): : 83 - &
  • [6] COLD PRESSURE WELDING OF ALUMINUM AND COPPER BY BUTT UPSETTING
    TABATA, T
    MASAKI, S
    AZEKURA, K
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1985, 28 (235): : 162 - 167
  • [7] COLD BUTT WELDING OF ALUMINUM TUBES TO COPPER TUBES
    STROIMAN, IM
    WELDING PRODUCTION, 1972, 19 (07): : 28 - 30
  • [8] MICROSTRUCTURAL EVOLUTION AND MATERIALS FLOW IN BUTT COLD WELDING OF COPPER
    Huang, Yong
    Yan, Xiao-Juan
    Ran, Xiao-Long
    MATERIALI IN TEHNOLOGIJE, 2020, 54 (06): : 799 - 805
  • [9] Programmed Calculation on A Computer of Structural Nonuniformity of Seam Metal in Pressure Contact Butt Resistance Welding.
    Dzhafarov, A.M.
    Izvestia vyssih ucebnyh zavedenij. Neft i gaz, 1981, (07): : 75 - 80
  • [10] A study of seam topography measurement system in 3D butt welding of main steel structure
    Zhen, Hengzhou
    Han, Yuemei
    MEASUREMENT TECHNOLOGY AND ENGINEERING RESEARCHES IN INDUSTRY, PTS 1-3, 2013, 333-335 : 126 - 129
12345