Formation of Threaded Surfaces in the Components Produced by 3D Printing

被引：4
|
作者：
Nefelov I.S. [1 ]
Baurova N.I. [1 ]
机构：
[1] Moscow Automobile and Road Construction State Technical University (MADI), Moscow
来源：
Russian Metallurgy (Metally) | 2017年 / 2017卷 / 13期
关键词：
3D printers; 3D printing; additive technologies; FDM technology; thread connections;
D O I：
10.1134/S0036029517130183
中图分类号：
学科分类号：
摘要：
The following two methods of formation of threaded surfaces on FDM components are considered: cutting with a hand-guided threading tool in a workpiece fabricated by 3D printing and 3D printing of components with initially simulated threaded surfaces in inner and outer cylindrical surfaces. The fabrication of threaded surfaces by 3D is found to be promising as compared to cutting. Printing is shown to be adjusted so that threaded components are produced under specific conditions, which differ from the printing conditions of the base material. © 2017, Pleiades Publishing, Ltd.
引用
收藏
页码：1158 / 1160
页数：2
相关论文
共 50 条
  • [41] Rapid prototyping of electrically conductive components using 3D printing technology
    Czyzewski, J.
    Burzynski, P.
    Gawel, K.
    Meisner, J.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (12-13) : 5281 - 5285
  • [42] Fabrication of Smart Components by 3D Printing and Laser-Scribing Technologies
    Yang, Weiwei
    Zhao, Wei
    Li, Qushi
    Li, Han
    Wang, Yiliang
    Li, Yongxiang
    Wang, Gong
    ACS APPLIED MATERIALS & INTERFACES, 2020, 12 (03) : 3928 - 3935
  • [43] Recent progress and challenges with 3D printing of patterned hydrophobic and superhydrophobic surfaces
    Reza Jafari
    Come Cloutier
    Anahaita Allahdini
    Gelareh Momen
    The International Journal of Advanced Manufacturing Technology, 2019, 103 : 1225 - 1238
  • [44] Mechanical Properties and Biocompatibility of 3D Printing Acrylic Material with Bioactive Components
    Raszewski, Zbigniew
    Chojnacka, Katarzyna
    Kulbacka, Julita
    Mikulewicz, Marcin
    JOURNAL OF FUNCTIONAL BIOMATERIALS, 2023, 14 (01)
  • [45] UTILIZING 3D PRINTING PENS FOR MAINTENANCE AND REPAIR OF ADDITIVELY MANUFACTURED COMPONENTS
    Koren, Kyle
    Olajoyegbe, Toluwalase
    Morkos, Beshoy
    Gutierrez, Hector
    PROCEEDINGS OF ASME 2021 INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, IDETC-CIE2021, VOL 3A, 2021,
  • [46] 3D printing of microwave passive components by different additive manufacturing technologies
    Perigaud, Aurelien
    Bila, Stephane
    Tantot, Olivier
    Delhote, Nicolas
    Verdeyme, Serge
    2016 IEEE MTT-S INTERNATIONAL MICROWAVE WORKSHOP SERIES ON ADVANCED MATERIALS AND PROCESSES FOR RF AND THZ APPLICATIONS (IMWS-AMP), 2016,
  • [47] 3D food printing: main components selection by considering rheological properties
    Jiang, Hao
    Zheng, Luyao
    Zou, Yanhui
    Tong, Zhaobin
    Han, Shiyao
    Wang, Shaojin
    CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION, 2019, 59 (14) : 2335 - 2347
  • [48] The study on surface characteristics of high transmission components by 3D printing technique
    Kuo, Hui-Jean
    Huang, Chien-Yao
    Wang, Wan-Hsuan
    Lin, Ping-Hung
    Tsay, Ho-Lin
    Hsu, Wei-Yao
    FIFTH INTERNATIONAL CONFERENCE ON OPTICAL AND PHOTONICS ENGINEERING, 2017, 10449
  • [49] 3D Printing in Capsule
    Mohd, Aasim
    Chaurasiya, Chanchal
    JOURNAL OF REPORTS IN PHARMACEUTICAL SCIENCES, 2022, 11 (02): : 156 - 164
  • [50] Comparison of textured nylon surfaces manufactured by CNC micromachining and 3D printing
    Ballesteros, Luis Miguel
    Cano, David
    Garcia, Camilo Andres
    Giraldo, Laura Vanessa
    Jimenez, Luis Felipe
    Rave, Esteban
    Rudas, J. S.
    Isaza, M. Cesar A.
    Toro, Alejandro
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2024, 12 (01)
12345