Formation of Threaded Surfaces in the Components Produced by 3D Printing

被引：4

作者：

Nefelov I.S. ^{[1
]}

Baurova N.I. ^{[1
]}

机构：

[1] Moscow Automobile and Road Construction State Technical University (MADI), Moscow

来源：

Russian Metallurgy (Metally) | 2017年 / 2017卷 / 13期

关键词：

3D printers; 3D printing; additive technologies; FDM technology; thread connections;

D O I：

10.1134/S0036029517130183

中图分类号：

学科分类号：

摘要：

The following two methods of formation of threaded surfaces on FDM components are considered: cutting with a hand-guided threading tool in a workpiece fabricated by 3D printing and 3D printing of components with initially simulated threaded surfaces in inner and outer cylindrical surfaces. The fabrication of threaded surfaces by 3D is found to be promising as compared to cutting. Printing is shown to be adjusted so that threaded components are produced under specific conditions, which differ from the printing conditions of the base material. © 2017, Pleiades Publishing, Ltd.

引用

页码：1158 / 1160

页数：2

共 50 条

[31] PETG/carbon fiber composites with different structures produced by 3D printing
Alarifi, Ibrahim M.
POLYMER TESTING, 2023, 120
[32] Gypsum-based sound absorber produced by 3D printing technology
Aslan, Ramazan
Turan, Osman
APPLIED ACOUSTICS, 2020, 161
[33] 3D PRINTING AND ADDITIVE TECHNOLOGIES IN EDUCATION
Vlkova, Iva
Hajnys, Jiri
13TH INTERNATIONAL TECHNOLOGY, EDUCATION AND DEVELOPMENT CONFERENCE (INTED2019), 2019, : 859 - 864
[34] Mechanical properties of structures produced by 3D printing from composite materials
Barnik, Frantisek
Vasko, Milan
Saga, Milan
Handrik, Marian
Sapietova, Alzbeta
XXIII POLISH-SLOVAK SCIENTIFIC CONFERENCE ON MACHINE MODELLING AND SIMULATIONS (MMS 2018), 2019, 254
[35] THE RESEARCH OF THE THERMAL AND MECHANICAL PROPERTIES OF MATERIALS PRODUCED BY 3D PRINTING METHOD
Gnatowski, Adam
Kijo-Kleczkowska, Agnieszka
Otwinowski, Henryk
Sikora, Piotr
THERMAL SCIENCE, 2019, 23 : S1211 - S1216
[36] Investigation of Discharge Characteristics of Hinges Produced with 3D Printing for Prosthetic Fingers
Seckin, Mine
Seckin, Ahmet Cagda
Yaman Turan, Necla
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2021, 24 (02): : 575 - 583
[37] Simulation of Optimal 3D Printing Parameters
Nefelov I.S.
Baurova N.I.
Polymer Science - Series D, 2023, 16 (01) : 173 - 177
[38] MECHANICAL PROPERTIES OF BIODEGRADABLE PLA PLASTIC PARTS PRODUCED BY 3D PRINTING
Beniak, Juraj
Krizan, Peter
Matus, Milos
MM SCIENCE JOURNAL, 2019, 2019 : 2746 - 2750
[39] Mixing of Commercially Available 3D Printing Filaments for Novel RF Components
Koehler, Jan
Boesch, Wolfgang
Leitgeb, Erich
Teschl, Reinhard
Pommerenke, David Johannes
2020 28TH INTERNATIONAL CONFERENCE ON SOFTWARE, TELECOMMUNICATIONS AND COMPUTER NETWORKS (SOFTCOM), 2020, : 195 - 200
[40] Self-adaptive slicing algorithm for 3D printing of FGM components
Li, Q.
Xu, X. Y.
MATERIALS RESEARCH INNOVATIONS, 2015, 19 : 635 - 641

← 1 2 3 4 5 →