Formation of Threaded Surfaces in the Components Produced by 3D Printing

被引：4
|
作者：
Nefelov I.S. [1 ]
Baurova N.I. [1 ]
机构：
[1] Moscow Automobile and Road Construction State Technical University (MADI), Moscow
来源：
Russian Metallurgy (Metally) | 2017年 / 2017卷 / 13期
关键词：
3D printers; 3D printing; additive technologies; FDM technology; thread connections;
D O I：
10.1134/S0036029517130183
中图分类号：
学科分类号：
摘要：
The following two methods of formation of threaded surfaces on FDM components are considered: cutting with a hand-guided threading tool in a workpiece fabricated by 3D printing and 3D printing of components with initially simulated threaded surfaces in inner and outer cylindrical surfaces. The fabrication of threaded surfaces by 3D is found to be promising as compared to cutting. Printing is shown to be adjusted so that threaded components are produced under specific conditions, which differ from the printing conditions of the base material. © 2017, Pleiades Publishing, Ltd.
引用
收藏
页码：1158 / 1160
页数：2
相关论文
共 50 条
  • [1] Challenges 3D Printing Microwave Components
    Hoel, Karina Vieira
    Kristoffersen, Stein
    2017 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION & USNC/URSI NATIONAL RADIO SCIENCE MEETING, 2017, : 3 - 4
  • [2] MODELING AND 3D PRINTING OF RULED SURFACES
    Hennessey, Michael P.
    Beaulier, Alex J.
    Shakiban, Cheri
    INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2015, VOL 1A, 2016,
  • [3] Characterization of ABS specimens produced via the 3D printing technology for drone structural components
    Ferro, Carlo Giovanni
    Brischetto, Salvatore
    Torre, Roberto
    Maggiore, Paolo
    CURVED AND LAYERED STRUCTURES, 2016, 3 (01): : 172 - 188
  • [4] Tensile Strength of Threaded Rods Made by 3D Printing of Polymeric Material
    Ripanu, Marius Ionut
    Mihalache, Andrei Marius
    Slatineanu, Laurentiu
    Mares, Marian
    Andrusca, Liviu
    Hrituc, Adelina
    Dodun, Oana
    Nagit, Gheorghe
    Coteata, Margareta
    Radulescu, Bruno
    MATERIALE PLASTICE, 2021, 58 (04) : 9 - 18
  • [5] 3D Printing onto Unknown Uneven Surfaces
    Bausch, Nils
    Dawkins, David P.
    Frei, Regina
    Klein, Susanne
    IFAC PAPERSONLINE, 2016, 49 (21): : 583 - 590
  • [6] 3D Printing as a Means for Augmenting Existing Surfaces
    Teixeira, Joao Marcelo
    Barros, Gutenberg
    Teichrieb, Veronica
    Correia, Walter Franklin
    2016 18TH SYMPOSIUM ON VIRTUAL AND AUGMENTED REALITY (SVR 2016), 2016, : 24 - 28
  • [7] Enabling the 3D Printing of Metal Components in μ-Gravity
    Zocca, Andrea
    Luechtenborg, Joerg
    Muehier, Thomas
    Wilbig, Janka
    Mohr, Gunther
    Villatte, Thomas
    Leonard, Fabien
    Nolze, Gert
    Sparenberg, Marc
    Melcher, Joerg
    Hilgenberg, Kai
    Guenster, Jens
    ADVANCED MATERIALS TECHNOLOGIES, 2019, 4 (10):
  • [8] 3D printing of ceramic components using a customized 3D ceramic printer
    Owen D.
    Hickey J.
    Cusson A.
    Ayeni O.I.
    Rhoades J.
    Deng Y.
    Zhang Y.
    Wu L.
    Park H.-Y.
    Hawaldar N.
    Raikar P.P.
    Jung Y.-G.
    Zhang J.
    Progress in Additive Manufacturing, 2018, 3 (1-2) : 3 - 9
  • [9] Design and Manufacturing of Microwave Components by 3D Printing
    Delmonte, Nicolo
    Silvestri, Lorenzo
    Tomassoni, Cristiano
    Piekarz, Ilona
    Sorocki, Jakub
    Perregrini, Luca
    Bozzi, Maurizio
    PROCEEDINGS OF THE 2022 21ST MEDITERRANEAN MICROWAVE SYMPOSIUM (MMS 2022), 2022, : 454 - 459
  • [10] A mini vibrational polishing machine produced by 3D printing
    Whitmore, Lawrence
    ULTRAMICROSCOPY, 2023, 243
12345